Dual Hydraulic Outlets
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129995
Printed Date: 05 Jun 2025 at 5:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Dual Hydraulic Outlets
Posted By: rustyorange45
Subject: Dual Hydraulic Outlets
Date Posted: 14 Oct 2016 at 8:31am
I just finished installing a 3 way hydraulic ball valve on my WD45. It allows me to raise my loader and valve it off and then I can use the lift cylinder for my mower . Really easy and I don't have to take my loader off when I use an implement with hydraulic lift. Use a 1/2" NPT 3 way ball valve, one 1/2" NPT nipple, two 1/2" NPT male 90*, and two hydraulic couplers. Plumb it into outlet of transport valve. Saves a lot of time and aggravation. Thanks to all who gave advice on this proje
-------------
1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader.
|
Replies:
Posted By: AaronSEIA
Date Posted: 14 Oct 2016 at 12:12pm
Sounds good as long as everything you used is built to handle the 3500 psi or so of the stock pump.
AaronSEIA
|
Posted By: rustyorange45
Date Posted: 14 Oct 2016 at 3:09pm
Everything is plumbed with hydraulic fittings.
-------------
1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader.
|
|