8070 MFWD with Duals at Auction
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129942
Printed Date: 24 Oct 2025 at 11:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8070 MFWD with Duals at Auction
Posted By: Cernunnos
Subject: 8070 MFWD with Duals at Auction
Date Posted: 12 Oct 2016 at 7:26pm
|
Drive by this beauty every day, but it is too big for my garage. Maybe someone here needs this:
http://spencersales.hibid.com/lot/27775810/allis-chalmers-8070-mfwd-diesel-tractor-with-duals/?sort=1&ref=catalog" rel="nofollow - http://spencersales.hibid.com/lot/27775810/allis-chalmers-8070-mfwd-diesel-tractor-with-duals/?sort=1&ref=catalog
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
Replies:
Posted By: Cernunnos
Date Posted: 12 Oct 2016 at 7:30pm
|
Nice D-17 diesel also:
http://spencersales.hibid.com/lot/27775837/allis-chalmers-d-17-diesel-tractor/?sort=1&ref=catalo" rel="nofollow - http://spencersales.hibid.com/lot/27775837/allis-chalmers-d-17-diesel-tractor/?sort=1&ref=catalo
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
Posted By: IBWD MIke
Date Posted: 13 Oct 2016 at 11:40am
Posted By: darrel in ND
Date Posted: 13 Oct 2016 at 11:47am
|
Man, when you said "beauty", you wasn't just blowin smoke. Darrel
|
Posted By: JohnCO
Date Posted: 13 Oct 2016 at 12:10pm
I couldn't see any info on where it is. The description says "starts and runs", I would hope it does better then that. Also says the trans slips in reverse, not a good sign, I think. Didn't see a posting of how many hours on it either. Bid at $7,300 with five days to go, and they charge a 10% buyers fee. May not turn out to be such a good deal. Nice looking machine though...
-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant
|
Posted By: TREVMAN
Date Posted: 13 Oct 2016 at 1:30pm
|
Clock indicates 8700 hours. Nice looking unit, but 8700 hours is a lot on a 426...Trev.
|
Posted By: BlackFatbob
Date Posted: 13 Oct 2016 at 3:36pm
|
They painted right over the red lens on the D17 ; )
|
Posted By: Cernunnos
Date Posted: 13 Oct 2016 at 5:04pm
It is located just east of Downing, Wisconsin. Right in the heart of God's country.
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
Posted By: Acfarm
Date Posted: 13 Oct 2016 at 7:59pm
|
Man, those shifter slots are worn out! Ours has 9300 hours and is nothing like that! Is that a later model fuel/temp gauge in the dash? Also, aren't 14.9R28 fronts a little small for 18.4R42 rears? Looks like a nice paint job on some hard hours
~Warren
|
Posted By: ryan(IN)
Date Posted: 13 Oct 2016 at 8:18pm
That's the Agco replacement for the temp/fuel gauge.
-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
Posted By: JCFarms
Date Posted: 13 Oct 2016 at 10:02pm
|
Front axle has been moved forward. Looks like to me on the 8070
|
Posted By: shameless (ne)
Date Posted: 14 Oct 2016 at 1:20am
|
I agree with JC, think the front has been moved forward, also looks like the "dipped" the D17! lol
|
Posted By: Cernunnos
Date Posted: 18 Oct 2016 at 8:30pm
The 8070 went for $12,600, the D17 diesel went for $2200, and a very nice WD45 narrow front went for $875.00 on tonight's auction.
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
Posted By: JohnCO
Date Posted: 18 Oct 2016 at 8:56pm
Actually they went for $13,800 and $2,420 with the 10% fee. I'd say the D17 was a good deal, not so sure about the 8070.
-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant
|
Posted By: Cernunnos
Date Posted: 18 Oct 2016 at 9:06pm
Yes, I forgot to add the buyers fee plus there is state tax. And here I thought the buyers fee was more of a suggestion..lol. I wish!
-------------
1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box
|
|