D14 Question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129886
Printed Date: 07 Jun 2025 at 10:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 Question
Posted By: Tim NH
Subject: D14 Question
Date Posted: 11 Oct 2016 at 4:47pm
I would like to look at the screen on the oil pump. It looks like the oil pan would slide ahead, thru the wide front end, then down and out. Or, is the front end in the way, and has to be taken off. Thanks Tim
-------------
1950 WD 1959 D14 1955 WD45 1976 7000 B 207
|
Replies:
Posted By: DSeries4
Date Posted: 11 Oct 2016 at 8:47pm
Never tried taking the pan off while the axle is on. I always removed the axle first, then there are no obstructions.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: Dan73
Date Posted: 11 Oct 2016 at 9:08pm
|
Tim on my d17 we did remove the oil pan to see what was wrong with the motor before removing the front end. It was a bad idea we fought with it for a very long time a couple of bolts where really hard to get out and it ended up hung up when we dropped it down. I don't know about the d14 but if it looks tricky I would rather remove the front axel it comes out pretty easy actually.
|
|