roto baler value/selling price
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129511
Printed Date: 21 Sep 2025 at 4:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: roto baler value/selling price
Posted By: tractorman
Subject: roto baler value/selling price
Date Posted: 02 Oct 2016 at 7:33pm
|
What is an old used roto baler worth or selling for ? hasn't been used in 25 or more years the owner says the belts in it looked good the last time he looked at them. Stored out side or in on roofed open shed. central WI ------------- Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190 |
Replies:
Posted By: Luke R.
Date Posted: 02 Oct 2016 at 8:11pm
|
Scrap price around here. ------------- 4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F |
Posted By: PaulB
Date Posted: 03 Oct 2016 at 9:42am
|
You can bet if it's been stored outside the belts are junk.
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: scott
Date Posted: 03 Oct 2016 at 10:15am
| I would try to trade it... |
Posted By: DougS
Date Posted: 03 Oct 2016 at 10:30am
True. "Looks good" until you fill the chamber half full of its first bale. |
PaulB wrote:Posted By: Creek Jenkins
Date Posted: 03 Oct 2016 at 2:20pm
|
If it's not roadable due to bad tires or axles they are tough to trailer because of the width. I was able to tow mine home 30 miles or so, stopping every 5 miles to grease the axle bushings. Mine sat outside for 10 years or so since the last use in the Minnesota weather and the belts are still okay - not great, but okay. It works but haven't been able to get it to work quite right yet - keeps tying the bale. Too much other stuff to do so I haven't spent a lot of time on it. I paid $300 for it, but also got a three point 10 foot wide cultivator in excellent condition with it. At the time I wanted the baler, but have gotten a lot more use out of the cultivator. Pretty sure I could still get $350 for the cultivator. cheers, Creek ------------- Have spacesuit, will travel |
Posted By: DiyDave
Date Posted: 03 Oct 2016 at 6:46pm
| if its a white top, its worth more than scrap... |