CA starter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129491
Printed Date: 23 Oct 2025 at 2:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA starter
Posted By: Seabee on AC
Subject: CA starter
Date Posted: 02 Oct 2016 at 1:00pm
|
Does anyone have a wiring schematic for changing a CA to solenoid start...I got my hands on a new Delco starter body...and it just has a post...not set up for the contact plunger most typical with CA C & B....don't want to purchase any more of those cheap contact switches unless I have to...and don't know if you can just purchase the "contact" post for the starter.It seems I got one from Steve at B&B yrs ago, but I don't see them available on his website.thanks.
|
Replies:
Posted By: JW in MO
Date Posted: 02 Oct 2016 at 8:25pm
My first question is, have you changed it to 12volt or is it the original 6? If you google Farmall Bobs wiring diagrams you should be able to adapt one of those to your tractor. Just pretend it says CA instead of H or M or whatever.
-------------
Maximum use of available resources!
|
Posted By: Seabee on AC
Date Posted: 02 Oct 2016 at 10:05pm
Posted By: pumpkinman
Date Posted: 02 Oct 2016 at 10:29pm
|
I HAVE DONE 2C/As & 1 B . I SOLDERED A ELECT PANEL LUG THAT HAS A SET SCREW TERMINAL AT ONE END TO THE STARTER LUG, CLEAN THE STARTER LUG WITH A FILE PUT SOLDERING PASTE ON IT USE A TORCH WITH A SMALL FLAME AND 50/50 SOLDER [DO THE SAME TO THE LUG ] TIN BOTH , HOLD THE LUG BY LOCKING A SCREW DRIVER IN WITH THE SET SCREW THEN SWEAT THEM TOGETHER. MOUNT THE SOLENOID ON THE SIDE PANEL KENT
|
Posted By: Seabee on AC
Date Posted: 03 Oct 2016 at 3:33pm
|
Thanks all....I got it done...hid the solenoid in the tool box...works great...best starting tractor I ever had
|
Posted By: Seabee on AC
Date Posted: 03 Oct 2016 at 3:34pm
|
Thanks all....I got it done...hid the solenoid in the tool box...works great...best starting tractor I ever had
|
|