Print Page | Close Window

Fully Understanding Clutch Adjustment On 1954 WD45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129485
Printed Date: 23 Oct 2025 at 6:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Fully Understanding Clutch Adjustment On 1954 WD45
Posted By: dannyraddatz
Subject: Fully Understanding Clutch Adjustment On 1954 WD45
Date Posted: 02 Oct 2016 at 8:41am
Good Morning,
I installed a new clutch in August of 2010 in the WD45, at the time I fully understood all of those adjustments. I know the peddle should have 1/2" to 1" free travel as measured on the frame rail or you would adjust the rod. I also was reading on the forum last night about adjusting the finger with the spacing to the throwout bearing. Before I make a big mistake, can a forum member refresh my 54 year old mind on the proper way to proceed with this adjustment. I have to give hay rack rides at a local church this month and don't want to have an issue with the WD45. If it easier you can call me at 708-275-6820.
Danny


-------------
Danny Raddatz


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net