Print Page | Close Window

500 series loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129160
Printed Date: 24 Oct 2025 at 3:08pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 500 series loader
Posted By: one54dodgetruck
Subject: 500 series loader
Date Posted: 24 Sep 2016 at 9:32am
Does anyone have the part numbers for the lift and bucket cylinder seal kits?

-------------
2 WDs
B
B112
D14
D15 shuttle
180
185
7040
Hd7w
D14
D15
185
7040 pd



Replies:
Posted By: Dan73
Date Posted: 24 Sep 2016 at 10:19am
I haven't taken mine off yet but I also have to do a set of curl cylinders so if you find the kit I would be interested in knowing where to get it.


Posted By: Fred in Pa
Date Posted: 24 Sep 2016 at 12:50pm


Go to AGCO Parts book .

Or call a AGCO Dealer let them look it up for you ,that's where you will you would have to go to buy them if you are using the Allis Chalmers part #

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.


Posted By: Dan73
Date Posted: 24 Sep 2016 at 12:51pm
I will probably just take mine to a shop that does them.


Posted By: LB0442
Date Posted: 24 Sep 2016 at 1:53pm
When you go to agcoparts.com and you get to the screen for search by model just type in loader and the next screen it lists AC farm loaders all.  It has all the loader part numbers from old to new (AC).  The 500 is probably toward the bottom of the list.  They don't list the model number on that list when you get to the parts list it shows the model number on the top of the page.


Posted By: Jack(Ky)
Date Posted: 24 Sep 2016 at 9:34pm
I just rebuilt all of mine not long ago. We rebuild cylinders where I work and sell the parts if you want to do your own.  These cylinders are easier to work on than any I have seen. They are very simple. They use a simple "v pack" on the piston and a "u seal" and wiper in the head. I can look up the #s and send them to you. You can look up our website at Froedge Machine & Supply Tompkinsville Ky. or call 270-487-5891 My name is Jack. Thanks JP

-------------
'59 D14 '68 170 Diesel '81 7020 40 All Crop



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net