D-19 Plus Dunham Lehr Loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128969
Printed Date: 19 Jul 2025 at 7:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-19 Plus Dunham Lehr Loader
Posted By: Mike Plotner
Subject: D-19 Plus Dunham Lehr Loader
Date Posted: 19 Sep 2016 at 5:37pm
acquired a loader today from my cousin, a Dunham Lehr 22 (?) that his grandpa had originally bought off my grandpas dealership for his 180 he had at the time. after the 180 left, it got put on a 1655 Oliver. few days ago the Oliver blew a head gasket while moving bales so my cousin offered to sell me the loader to help him pay for the repair.
So with it having come from grandpas dealership, and having bought a decent D-19, I figured it would be a nice combo
Question is, how close will the 180 brackets be to the D-19? the Oliver ones? I know you can buy them new, but with this being a low budget operation I figured a little fabricating may not be out of the question.
-------------
2001 Gleaner R42, 1978 7060, 1977 7000, 1966 190 XT, 1966 D-17 Series IV and 1952 WD and more keep my farm running!
|
Replies:
Posted By: Dans 7080
Date Posted: 19 Sep 2016 at 9:48pm
If it mounts on the frame rails the 180 should be about an inch wider overall.
-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door
|
Posted By: gerkendave
Date Posted: 27 Aug 2018 at 8:05am
|
Hey Mike, Resurrecting this old post to see if you ever mounted the loader to the 19. I'm looking at a model 2 for my d17 iv. I'm not sure what the difference was between the 2 and 22. Hoping it will fit nicely with some custom mounts if need be.
|
|