Print Page | Close Window

AC CA tractor rear wheel bolt pattern

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128381
Printed Date: 19 Jun 2025 at 10:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: AC CA tractor rear wheel bolt pattern
Posted By: davh
Subject: AC CA tractor rear wheel bolt pattern
Date Posted: 06 Sep 2016 at 6:34am
I know the rear wheels on the Allis CA have 6 lugs but what is the bolt pattern? Will 6 3/4 in 6 lug fit?



Replies:
Posted By: Ken in Texas
Date Posted: 06 Sep 2016 at 6:40am
Same as a Farmall A or a D 10 Allis. The stamped steel wheel centers from both will bolt up on a CA.   I have Farmall steel whells on my CA puller.


Posted By: davh
Date Posted: 06 Sep 2016 at 7:06am
I found some wheels that had 6 3/4 in pattern and was wondering if they would fit. Thanks, Dave


Posted By: TMiller/NC
Date Posted: 06 Sep 2016 at 11:16am
I measure 6 1/2" thru center. Tim


Posted By: davh
Date Posted: 06 Sep 2016 at 4:03pm
I found some wheels with 6 3/4 bolt pattern and was afraid they were not correct. Thanks for the post. Dave


Posted By: DiyDave
Date Posted: 06 Sep 2016 at 6:09pm
farmall centers, like a 140, cub or A will fit...


Posted By: Gary Burnett
Date Posted: 06 Sep 2016 at 7:34pm
Originally posted by DiyDave DiyDave wrote:

farmall centers, like a 140, cub or A will fit...


Cub won't fit they're 5 lug same pattern as a lot of garden tractors.


Posted By: Ken in Texas
Date Posted: 06 Sep 2016 at 11:40pm
I think you can add Farmall B wheels and drop the Cub. Farmall rear wheel weights work on D10s with stamped steel wheels. Those weights on my Ca are Farmall


Posted By: Gary Burnett
Date Posted: 07 Sep 2016 at 7:50am
Originally posted by Ken in Texas Ken in Texas wrote:

I think you can add Farmall C wheels and drop the Cub. Farmall rear wheel weights work on D10s with stamped steel wheels. Those weights on my Ca are Farmall


Farmall C has a totally different wheel think  its  a 36  inch rim with cast iron centers.Would definitely make a CA high clearance.


Posted By: jaybmiller
Date Posted: 07 Sep 2016 at 8:57am
6 bolt GMC truck rims fit.........

..kinda makes for a 'low rider' though...

Jay



-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water


Posted By: davh
Date Posted: 19 Sep 2016 at 6:41am
Can't find my information on the Pertronix Electronic ignition for my B Tractor. All I remember is Steve. Anyone know the contact info? thx. davh


Posted By: stu(ON)
Date Posted: 19 Sep 2016 at 12:48pm
http://www.bb-customcircuits.com/" rel="nofollow - http://www.bb-customcircuits.com/


Posted By: davh
Date Posted: 19 Sep 2016 at 4:39pm
Thanks, davh



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net