Farm Equipment - D17 series 4 questions

Print Page | Close Window

D17 series 4 questions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=127533
Printed Date: 03 Sep 2025 at 12:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 series 4 questions

Posted By: Josh Day
Subject: D17 series 4 questions
Date Posted: 20 Aug 2016 at 9:06am

Hi guys, rebuilding thewide front end how do I get the tie rod arms off the top of the spendals one guy told me you have to cut them rebuild it then clamp them togegeather on the spendals then weld it back togeather. and also going to go through the hydro pump and power steering pump and assist cylinder. Any good pointers before I do this. Thanks

-------------
AC's 75' 7040, 64' D-17S4, 55'WD-45, 54' WD-45, 53' WD-45, 53' WD, 52' CA, 36' WC. IH 656. Deere's 38' A, and 47' A

Replies:

Posted By: MACK
Date Posted: 21 Aug 2016 at 8:48am

Best way to get steering arms off is to remove snap ring, remove wheel, remove axel assay, turn upside down then slide back in. Take a sledge hammer and beat arm off.

Easier for a younger man than a old &%$# like me. MACK