3138-4 and -5 wheel weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125872
Printed Date: 25 Aug 2025 at 10:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 3138-4 and -5 wheel weights
Posted By: HaroldOmaha
Subject: 3138-4 and -5 wheel weights
Date Posted: 13 Jul 2016 at 9:48pm
|
On the inside rear wheel weights
for the B-C-CA- D10-D12 I've found AM3138-4 and-5 Are the 4s for the Bs + Cs and the -5s made with a steeper dish for CAs, D10s andD12s with power shift ?
along with fitting the older Bs + Cs Harold
|
Replies:
Posted By: HaroldOmaha
Date Posted: 14 Jul 2016 at 1:59pm
|
Any Ideas on B-C-CA, D 10-D-12 wheel weights ? Any one have bolts for sale ? Square head( 1" ) - 3/4 x 4"
need 4 to go with the weights when I sell them when the paint is dry.
|
Posted By: DSpears N IL
Date Posted: 14 Jul 2016 at 5:03pm
|
Could you measure the over-all outside decisions, are they the same? Could you take a photo of the two for comparison? I do not know the difference of the 2 numbers or what they may fit. I do see pictures of the -5 weight on Brian Aharts web site. Thanks DeWayne |
Posted By: HaroldOmaha
Date Posted: 14 Jul 2016 at 9:51pm
|
I only have the -5s The dimensions are
; 8" axel hole is beveled on one side and 71/2 on the opposite flat side , mounting holes are 14" to center mounting holes are 3/4", bolts are 1" square head
by 4" the flat side of weight is dished in 1" toward the center axel hole.
|
Posted By: HaroldOmaha
Date Posted: 14 Jul 2016 at 9:52pm
| there are pics of the-5s on ebay, no -4s last time I looked |
Posted By: DSpears N IL
Date Posted: 15 Jul 2016 at 7:47pm
|
Harold, thanks for the measurements on the weights. I have been looking for the Part# for the inside weights for the CA spin-out wheels. DeWayne  |