CA hydraulic pump part needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125310
Printed Date: 19 Dec 2025 at 4:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA hydraulic pump part needed
Posted By: Hubnut
Subject: CA hydraulic pump part needed
Date Posted: 01 Jul 2016 at 6:59pm
My hydraulic pump on the CA works, but won't release. I pulled it apart and cleaned it and noticed that the plunger is missing. Anybody have a parts tractor I could buy this plunger off of? It is part number 224894 and shown in the picture below. It's just to the left of the ball. ------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H |
Replies:
Posted By: Rick
Date Posted: 01 Jul 2016 at 7:08pm
| Steve...Sent you a PM. Rick |
Posted By: WF owner
Date Posted: 01 Jul 2016 at 7:44pm
| I could be wrong, but I thought someone on here said the internals of a CA pump are the same as a WD & WD45. That might make the search for parts easier. |
Posted By: Hubnut
Date Posted: 01 Jul 2016 at 9:28pm
|
Thanks Rick!! Steve ------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H |
Posted By: PaulB
Date Posted: 02 Jul 2016 at 6:10am
|
AGCO has a kit with all the replaceable parts in it for the "HOLD VALVE"
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Nat
Date Posted: 02 Jul 2016 at 7:56am
|
you can still get the plunger from ACCO. I ordered one this past fall
------------- Nat |