Farm Equipment - New Holland 275 baler problems (wire model)

Print Page | Close Window

New Holland 275 baler problems (wire model)

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125255
Printed Date: 15 Jun 2025 at 10:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: New Holland 275 baler problems (wire model)

Posted By: Sandknob
Subject: New Holland 275 baler problems (wire model)
Date Posted: 30 Jun 2016 at 3:08pm

I have a 275 wire tie baler that refuses to twist on one side. Other side does great. If I hand prep the wire and run a Bale thru and force it to tie (again by rolling the flywheel by hand) it will tie perfectly. But use the PTO and it acts like it pulls the wire out of the "finger" holder (one that moves side to side to hold the wire while Bale is forming). Any ideas from Allis land?
Thanks
Adam

Replies:

Posted By: Daehler
Date Posted: 30 Jun 2016 at 9:35pm

Sounds like its out of adjustment some. You should be able to adjust those or you might need new ones. I remember the 320 we have has done that.

-------------
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"

Posted By: thendrix
Date Posted: 01 Jul 2016 at 7:46am

If you can't see a noticeable difference (broken/missing parts) between one side and the other, then start checking adjustments to the manual. While you're at it, check/adjust both sides

-------------
"Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan