Construction and other equipment

Print Page | Close Window

h-3

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12440
Printed Date: 04 May 2024 at 1:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: h-3

Posted By: acjwb
Subject: h-3
Date Posted: 14 May 2010 at 9:16am

I recently bought a h-3 gas dozer that was without the hood. Is the hood off a d-15 the same?

Replies:

Posted By: kip in cny
Date Posted: 14 May 2010 at 9:22am

yes

-------------
160 CA 920diesel 5020 HD-3

Posted By: Kipn
Date Posted: 14 May 2010 at 9:44am

I don't believe so. There was a thread a while back with the measurements on the length of the hood. If I remember right, an H3 hood is like one inch shorter than a D15. Search it.

-------------
1961 H3

Posted By: Calvin Schmidt
Date Posted: 15 May 2010 at 5:44am

I posted on the earlier thread but don't remember the exact measurements now, but for sure the H-3 hood is shorter than the D-15.

-------------
Nothing is impossible if it is properly financed

Posted By: ChuckLuedtkeSEWI
Date Posted: 15 May 2010 at 7:37am

Yes, the H3 hood is shorter. I think it is 38.25 where the D15 hood is 39.75 or something like that. Basically you could take a d15 hood and make it work on a h3 or hd3 by making it shorter. If you find any hood panels for your H3 that are for a HD3 send them my way as I am still looking for a set for my HD3.