Farm Equipment - C hydraulics

Print Page | Close Window

C hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=123833
Printed Date: 15 Jun 2024 at 11:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: C hydraulics

Posted By: brando
Subject: C hydraulics
Date Posted: 27 May 2016 at 10:23am

I recently got my C running and I was testing out the original hydraulics. When I pull the lever the piston goes out but wont go back in. Does the weight of the implement push the piston back in or is something not working right? side note when I tested it I did not have a plow or anything on the tractor as I don't have a rock shaft on it yet.

-------------
1942 Allis C

Replies:

Posted By: CAL(KS)
Date Posted: 27 May 2016 at 10:42am

may not go down without an implement. only pressure up not back down

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: AJ
Date Posted: 27 May 2016 at 11:02am

One way cylinder.

-------------
Can't fix stupid

Posted By: brando
Date Posted: 27 May 2016 at 11:09am

thanks guys much appreciated

-------------
1942 Allis C