Farm Equipment - 190 gas problem

Print Page | Close Window

190 gas problem

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=123155
Printed Date: 29 Aug 2025 at 2:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 gas problem

Posted By: j birke
Subject: 190 gas problem
Date Posted: 10 May 2016 at 7:33pm

Looking at another 190 gas! The problem is the throttle is either idle are wide open. Is this a easy easy fix or what do I need to look at replacing.

-------------
25-40, WD-45, D14, D17D, D19G, D19G, D19D, D19D, 185, 190G, 190D, 200, 7000, 7060, and 8030

Replies:

Posted By: DougG
Date Posted: 10 May 2016 at 7:41pm

That's kinda how they are, at least the ones ive been on , smooth running but theres no in between ; I just keep it opened up

Posted By: Dakota Dave
Date Posted: 10 May 2016 at 8:05pm

My 190 gas has a very smooth transition through its entire throttle range from idle to full power. It holds any speed without a problem.

Posted By: JimWenigOH
Date Posted: 10 May 2016 at 8:38pm

Dakota Dave wrote:

My 190 gas has a very smooth transition through its entire throttle range from idle to full power. It holds any speed without a problem.

Mine does too.

Posted By: DSeries4
Date Posted: 10 May 2016 at 8:57pm

A couple of thoughts: maybe the governor weights are on the way out, or someone put a combine engine in the tractor. Don't quote me, I am not familiar with 190 gassers.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: MACK
Date Posted: 10 May 2016 at 9:54pm

I would say linkage between governor arm and crab. Needs adjusted or worn out cab. Or Linkage . MACK