1500 min till
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120987
Printed Date: 11 Jul 2025 at 12:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1500 min till
Posted By: Shawn PA
Subject: 1500 min till
Date Posted: 26 Mar 2016 at 8:51pm
|
I'm looking at a 9 shank disc chisel. My 7045 can pull a 7 shank Glencoe about 7 mph. I used a neighbors 9 shank brillion with 2 shanks off. I can't pull it as fast same depth. My question is does the 1500 pull easy ? I'd like to leave it 9 but if I can't pull it I want to find a 7 shank. Thanks Shawn.
|
Replies:
Posted By: ryan(IN)
Date Posted: 26 Mar 2016 at 9:13pm
In our area with our soils we pull a 7 shank min till with a 7060 and it sometimes makes her grunt pretty good. The 8070 pulls it a little better but it's fwa. I don't know if a 7045 would pull a 9 or not.
Edit: our 1500 has 4 inch twisted points. We have ran spike points before and that made it pull easier. But didn't deal with trash as well.
-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
Posted By: Daehler
Date Posted: 26 Mar 2016 at 9:14pm
Depends on what size shovel is on it. Used a 9 shank with 4 inch twisted shovel with a 8070 and it knew something was back there. I wouldn't be too afraid to put it on the 7045 at my farm but it would depend on what type soil it would be working.
-------------
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"
|
Posted By: Shawn PA
Date Posted: 26 Mar 2016 at 9:21pm
|
We have some tough ground in places. Some limestone ground and yellow clay.
|
|