Construction and other equipment - Tree Puller or post puller

Print Page | Close Window

Tree Puller or post puller

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120910
Printed Date: 20 Jun 2025 at 8:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Tree Puller or post puller

Posted By: Coke-in-MN
Subject: Tree Puller or post puller
Date Posted: 25 Mar 2016 at 12:58pm

Sons tree puller or post puller . For skid loaders or modified for 3 point tractors .

[TUBE]http://youtu.be/rNv0cyzc90k[/TUBE]

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Replies:

Posted By: Coke-in-MN
Date Posted: 25 Mar 2016 at 1:00pm

If someone needs a testimonial on this - Shameless might chime in and say how good it works .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Ian Beale
Date Posted: 26 Mar 2016 at 5:05am

Coke

Not going to sell any machinery but another post puller from the BAR end of ranching (busted a**^ ranch).

A hefty tree fork about 3 feet long with a slot chainsawed in the single end to locate a chain and the fork ends trimmed to a blunt flat point.

Stand with the fork end down against the post at about 45 degrees, with a chain from the base of the post over the single end of the fork and on to your 4wd and pull.

Doesn't always work first time but with some adjustments for conditions does work. And you don't have to double shuffle machinery.

Known here as "The Tooth Puller"

Posted By: Coke-in-MN
Date Posted: 26 Mar 2016 at 2:29pm

Galen tried several designs for tree puller - has a couple other designs but didn't do as good a job .

Posted By: Coke-in-MN
Date Posted: 28 Mar 2016 at 9:33pm

Galen just shipped a buckthorn puller out to Maryland today - a order over internet video of the unit so - loaded onto Fed X truck and on it's way .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: darrel in ND
Date Posted: 31 Mar 2016 at 6:21pm

Buddy of mine got one of Galen's in a partnership deal with me last fall, but the ground froze up right about the time we got it, so we haven't tried it out yet. Darrel

Posted By: SHAMELESS
Date Posted: 01 Apr 2016 at 1:30am

i'm still using mine I got from Galen, mines a 3-pt model, as I don't have a skid loader. I hook it to the 7010. I normally pull 5-6 inch on down size trees, I did pull one 9 inch dead cedar with it, it worked fine. so far I've pulled about 1500 trees with mine, and it doesn't even look used! I keep the slider greased well. there has been a lot of people in my area look at mine and like how heavy it's built, I gave them all Galens phone number! I should start a dealership for them down here! all I see around here are those hyd "v" shaped pullers that mount on skid steers, and see a lot of them on auctions all bent to chit! i'll be going out with mine again this spring to pull more! you can also stack/pile the pulled trees with it, I've got piles all over on the pulled trees I've done so far! had one dude stop on the road and watch while I was carrying a 30 ft tall tree to the pile one day! Darrell...you'll like yours too when you use it!

Posted By: SHAMELESS
Date Posted: 01 Apr 2016 at 1:34am

Coke....post that vid on the farm machinery site too

Posted By: Coke-in-MN
Date Posted: 01 Apr 2016 at 10:45am

He is looking for dealers for the units - has a dealer here in MN and has a special system on discount for him -

Also has his product liability insurance and has couple units now at A machinery dealer in area but wants to expand

Good time right now as slow time as snow plow mfg was slow - right now shop is down to building inventory and sales are slow .