Farm Equipment - WD axle bearing

Print Page | Close Window

WD axle bearing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=119491
Printed Date: 01 Oct 2025 at 6:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD axle bearing

Posted By: Charlie175
Subject: WD axle bearing
Date Posted: 25 Feb 2016 at 12:32pm

I need to replace the top outer bearing on the axle shaft. Can this be done without removing the shaft?

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Replies:

Posted By: CTuckerNWIL
Date Posted: 25 Feb 2016 at 12:56pm

Do you mean the outer pinion shaft bearing? If that is the one you are referring to, it could be replaced, if you can get the race out and then pull the bearing. I don't know how much room there is to work in there.
The outer axle bearing is between the Hub on the axle and the final drive bull gear and the pan and axle would have to come out to replace it.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Charlie175
Date Posted: 25 Feb 2016 at 1:05pm

Yes sir you are correct. I might was well pull the whole thing off since I already have the brakes out of it.

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: SteveM C/IL
Date Posted: 25 Feb 2016 at 1:31pm

The hard part is done.