D 10 parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=119278
Printed Date: 28 Oct 2025 at 11:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 10 parts
Posted By: AllisTim
Subject: D 10 parts
Date Posted: 21 Feb 2016 at 1:21am
|
Does anybody know if the three point adjustment handles with the wood handles are still around? Could use some if they are. |
Replies:
Posted By: DiyDave
Date Posted: 21 Feb 2016 at 5:28am
| Tim, I've never seen wooden handles, on the handles. Got a picture? It might be a farmer fix... |
Posted By: TimNearFortWorth
Date Posted: 21 Feb 2016 at 7:36pm
|
Earlier 3-pt. units had the angled plate type adjuster with the wooden handles, later units were solid bar steel that was shaped for the adjusters. Have a Series Two that I have been meaning to source/make some of these handles for also so curious if anyone knows where original looking wooden handles can be sourced . . . . |
Posted By: Larry in NC
Date Posted: 21 Feb 2016 at 7:53pm
| The earlier Series II D10's had the handle for the adjustment arm that you are describing, but the rollers on the handle were cast iron. If you have a tractor with wood, it is a owner modification. The later Series II and III tractors had the bent metal rod handle that you also mentioned. This type is available as a aftermarket replacement. |
Posted By: AllisTim
Date Posted: 22 Feb 2016 at 2:14am
|
Posted By: AllisTim
Date Posted: 22 Feb 2016 at 2:16am
| need to find adjustment handle like on the left side of picture |
Posted By: Charlie175
Date Posted: 22 Feb 2016 at 5:30am
|
Mine are wooden also. I have been looking for one for my left side. http://smg.photobucket.com/user/RangerCharlie/media/D10/IMG_4909_zpsterbinxr.jpg.html" rel="nofollow">  ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Charlie175
Date Posted: 22 Feb 2016 at 6:32am
|
The new style is much easier to use. http://smg.photobucket.com/user/RangerCharlie/media/D10/IMG_4908_zpstvvn0cj2.jpg.html" rel="nofollow">  ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |