Off topic - IHC skid steer loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=119276
Printed Date: 19 Jul 2025 at 1:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Off topic - IHC skid steer loader
Posted By: JohnCO
Subject: Off topic - IHC skid steer loader
Date Posted: 21 Feb 2016 at 12:05am
I've got an old IHC 3300B skid steer loader with a bad loader hydraulic pump. I've spent hours searching the internet for information or parts for it, haven't come up with anything yet. The pump is a TRW H, IH # 68576 - C91 190. What seems to make it unique is it has a tapered drive shaft with a key for the gear. Got a pump at Surplus Center a few years ago but it has a straight shaft. Might be able to somehow grind out the gear but wouldn't be easy. Probably too hard to do in a lathe. Any Ideas?
-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant
|
Replies:
Posted By: darrel in ND
Date Posted: 21 Feb 2016 at 1:27pm
|
I would sure think that as big as Denver is, someplace there would be able to help ya out. A generic hydraulic shop ought to be able to fix you up. I (actually my wife) just bought an IHC skid loader, model 3200 A, and I hope we don't get to having trouble finding parts. Darrel
|
Posted By: Coke-in-MN
Date Posted: 21 Feb 2016 at 4:51pm
I replaced a pump on a New Holland skid steer - found the same pump with a different shaft - (NH had lock on the shaft for mfg rights) just replaced rotor , housing and everything but shaft with second pump parts - 1/4 price of NH unit.
Same with some valves that went into control - NH was $250 + and so called non serviceable - units I got were $70 and used a snap ring retainer for internal parts where NH had a swedged permanent closure which made service impossible .
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
Posted By: SHAMELESS
Date Posted: 06 Mar 2016 at 6:35pm
|
did IHC make their own or was it re-badged?
|
Posted By: CTuckerNWIL
Date Posted: 06 Mar 2016 at 7:33pm
I doubt the bore of the gear is hard. If you can score it with a file, you can bore it on a lathe. If it is hard, I have rigged a die grinder in a lathe to use as an ID grinder.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
|