Farm Equipment - 7060 question

Print Page | Close Window

7060 question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=119241
Printed Date: 14 Oct 2025 at 9:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 question

Posted By: spencefarm
Subject: 7060 question
Date Posted: 20 Feb 2016 at 10:23am

So I have a blow out in a hydraulic line somewhere but I need to add fluid to find it. I don't have a book for the tractor so I want sure if I was correct in thinking that I add the fluid in the hole behind the cab between the 3 point arms? Need some guidance. Thank

Replies:

Posted By: tornado8070
Date Posted: 20 Feb 2016 at 10:25am

Can you see oil in the sight glass on the left side of rear end housing? Power shift or power director trans?

-------------
09’ DT205B, 08’ DT220A, 83' 8070 MFWD, 83’ 8070 85’ 8050 MFWD, 83' 8030, 82' 8010, 85’ 6080 MFWD, 84’ 6080, 79' 7020, 85' M3 RWD, 85' 920 diesel,AC C-50 forklift.

Posted By: SHAMELESS
Date Posted: 20 Feb 2016 at 10:38am

check both places, in the cab and the sight glasses...2 different resivors

Posted By: spencefarm
Date Posted: 20 Feb 2016 at 11:17am

Is a power director. In the cab is fine. There is nothing in the sight gauge on the rear end.

Posted By: tornado8070
Date Posted: 20 Feb 2016 at 3:45pm

Then you would add oil in the rear end between the lift arms.

-------------
09’ DT205B, 08’ DT220A, 83' 8070 MFWD, 83’ 8070 85’ 8050 MFWD, 83' 8030, 82' 8010, 85’ 6080 MFWD, 84’ 6080, 79' 7020, 85' M3 RWD, 85' 920 diesel,AC C-50 forklift.

Posted By: spencefarm
Date Posted: 20 Feb 2016 at 3:47pm

Got it figured out. Thanks for the advice guys!