Print Page | Close Window

Gravely Mower Parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=118103
Printed Date: 27 Jul 2025 at 11:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Gravely Mower Parts
Posted By: Bill Long
Subject: Gravely Mower Parts
Date Posted: 26 Jan 2016 at 1:43pm
Ladies and Gentlemen,  My son is using a Gravely Lawn and Garden tractor for his mowing and snow plowing.  He has recently purchased a larger place and will need to get the mower deck in operating order and some seals for the axles.  He is asking if anyone has a source for Gravely Mower Deck Parts.  It is a 1992 unit.  Still runs and works well.  In fact it was a super star in our recent record snowfall.
Here is a list of the parts - with numbers - he will need.  Any help will be appreciated.

QTY                                                Part #                          
3- Spindles                                  58803600                     
1-Belt                                             07276700                      
2- Axle Gaskets                         08701800                      
2-Axle Seals                               0561820    

Thanks again for your consideration.
Good Luck!
Bill Long                   





Replies:
Posted By: CTuckerNWIL
Date Posted: 26 Jan 2016 at 2:44pm
Here ya go Bill. I put in the spindle number but you can search for any part # from this page. GET OUT THE CHECKBOOK for those spindles.
http://www.partstree.com/parts/search/parts/?searchTerm=58803600++++++++++++++++++++++%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20" rel="nofollow - http://www.partstree.com/parts/search/parts/?searchTerm=58803600++++++++++++++++++++++


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: Ted J
Date Posted: 26 Jan 2016 at 3:40pm
Bill, here's where I get a lot of parts.  He's a little cheaper on most stuff.
http://www.jackssmallengines.com/products/GRAVELY/Spindles/58803600/252023" rel="nofollow - http://www.jackssmallengines.com/products/GRAVELY/Spindles/58803600/252023

http://www.jackssmallengines.com/manufacturer/gravely" rel="nofollow - http://www.jackssmallengines.com/manufacturer/gravely


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: DiyDave
Date Posted: 26 Jan 2016 at 5:57pm
There is a gravely club, online, don't remember the address, but I think you could prolly find the seals at a napa, iff'n you take the old ones with you...


Posted By: jaybmiller
Date Posted: 26 Jan 2016 at 6:09pm
I love the 'maintenance free' claim to the spindles....
I googled them about 20th picture shows them all apart,so why not whack them, replace the bearings, add a grease zerk and save a WHACK of cash ??
I know one of them guys welds them up after assy but a $20 angle grinder with a thin blade can open them up in 2 minutes.

Jay



-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net