Terra Tiger Cone Clutch Rebuild
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=116753
Printed Date: 18 Jul 2025 at 3:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Terra Tiger Cone Clutch Rebuild
Posted By: nowaktj
Subject: Terra Tiger Cone Clutch Rebuild
Date Posted: 28 Dec 2015 at 9:49am
Hi guys,
Where could I send my Terra Tiger cone clutches to to have them relined and/or reglued?
Thanks
Terry
-------------
D19D, D17D, WD, WC, Snobee, #83 Plow, SC Blade, 14' disk, 400 series planter, B , Terra Tiger, M Dozer w/Baker Blade, TL-12, 42S Grader, G
|
Replies:
Posted By: ctbowles58
Date Posted: 28 Dec 2015 at 10:05am
get ahold of " farmtoybuilder" on the forum, he is kind of the "guru" on TERA-TIGERS.
-------------
190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more
|
Posted By: farmtoybuilder
Date Posted: 28 Dec 2015 at 10:58am
We can fix you up Terry! Or if you have a mining type shop that relines clutch and brakes from cranes and such could do them. Takes special adhesive for them. We have a set of relined ones in stock. Exchange your old ones for new would be $150.00 plus $12.00 shipping. We also have new springs and h duty springs for them.
-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.
|
Posted By: Ron Nelson
Date Posted: 29 Dec 2015 at 9:23am
|
I had Rick in Mo. reline mine and he did a great job.
|
Posted By: desertjoe
Date Posted: 29 Dec 2015 at 2:27pm
Ditto, on Rick here on the site, if it has to do with clutches or brakes,,,he will do you a great job,,,plus he carries a really sharp pencil,,,,!!!
|
Posted By: farmtoybuilder
Date Posted: 29 Dec 2015 at 3:51pm
Common lining material doesn't last long on them. We tried quite a few different types of material on them. And old weak springs allows slippage and wear! You should install new springs when replacing cones. We had a Heavy duty spring made for them also. It stands higher HP engines and No washers are needed on them to increase pressure on cones. Our racing-play one has been running 2 years or so with a modified Kawasaki 30 hp. v twin engine and clutches are still like new.
-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.
|
Posted By: Ron Eggen
Date Posted: 29 Dec 2015 at 7:34pm
|
Try Route 6 X 6 .com for info on all terra tiger needs.
|
|