Construction and other equipment - Allis Chalmers 636 Hydrocone

Print Page | Close Window

Allis Chalmers 636 Hydrocone

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=116325
Printed Date: 03 Nov 2025 at 9:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Chalmers 636 Hydrocone

Posted By: cbrewer
Subject: Allis Chalmers 636 Hydrocone
Date Posted: 18 Dec 2015 at 2:59pm

I am on the hunt for a serial number from a machine bought at auction. A 636 Type R Hydrocone. I have the serial number from the engine as well as the casting # off of the main frame (Bottom Shell). I am a Metso vendor & have been in contact with them but so far no luck. Was wondering if anyone here was knowledgeable of these machines or knew of any one that could possibly assist me in identifying the age of the machine or know of any other identifying factors that could aide in finding the serial number. Or at least narrowing down the age enough to confidently buy parts to repair some minor issues that it has. Any help or advice would be greatly appreciated.

-Christen

Replies:

Posted By: HD6GTOM
Date Posted: 18 Dec 2015 at 3:39pm

try googling Excel Foundry Machine Co. they might have your parts

Posted By: Coke-in-MN
Date Posted: 20 Dec 2015 at 4:35pm

http://drymateplus.asia/slideshare/24452-Allis_Chalmers_Hydrocodone_Manual_Crusher_Allis_Chalmers_36_Hydrocodone_Manual

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: cbrewer
Date Posted: 21 Dec 2015 at 6:55am

Thanks for the replies. I actually have a library of the manuals because we are a Metso vendor so I have access to all of their materials but does not help me unless I have the actual serial number. I was hoping to find someone in this forum that was very knowledgeable of these machines.