Print Page | Close Window

313 flex head

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=115623
Printed Date: 05 Apr 2026 at 7:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 313 flex head
Posted By: Alex (wi)
Subject: 313 flex head
Date Posted: 03 Dec 2015 at 11:10am
Have an Allis Chalmers 313 flexhead for a F3.  The metal pans that slide over each other are wore out.  Went to the Allis-Gleaner Co. parts books, but not seeing these sections in there.  It looks there are 10 pieces altogether.  Any thoughts on where I can get these parts?

Thanks in advance for any advice.

~Alex (WI)



Replies:
Posted By: Lonn
Date Posted: 03 Dec 2015 at 11:13am
Shoup but AGCO should have them I would think

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: aras
Date Posted: 03 Dec 2015 at 11:22am
I have a set of one piece feather sheets on a 320 head.  Way better -- if you are interested they came from Canada but are easily duplicated.  Located near Medford if you are interested in seeing them


Posted By: Alex (wi)
Date Posted: 03 Dec 2015 at 11:33am
Found somthing. Part No. 71321798 feather sheet (4) and 71373817 (1).  Not sure what part numbers are for the other 5 sheets?  I've seen a stainless steel set up on one of these heads before, is that what you have on your 320? do you have info for that supplier?

~Alex


Posted By: Wade (IA)
Date Posted: 03 Dec 2015 at 12:07pm
Shoup has the SS pieces much cheaper than Agco.


Posted By: aras
Date Posted: 03 Dec 2015 at 12:11pm
they are stainless steel but they are like the 500 series and don't meet in the middle.  They are from an AGCO dealer in Canada.  I think it is Amos that turned me on to this idea.


Posted By: aras
Date Posted: 03 Dec 2015 at 12:12pm


Posted By: aras
Date Posted: 03 Dec 2015 at 12:13pm
You can sort of see how there is no splice -- the sheet floats under the bar behind the sickle


Posted By: tbran
Date Posted: 03 Dec 2015 at 8:45pm
If the sheets are worn out - better check the ball joints and STABILIZER - the reciprocating action of a cutter bar vibrating back and forth in dirty conditions will drastically shorten the life of any 'feather' system.   4-71373820 and 1-71373817 are the 5 feather sheets u need and 1 -71373824 and 4 71373823 are what you need for the front sheets..

-------------
When told "it's not the money,it's the principle", remember, it's always the money..



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net