Print Page | Close Window

HHC wiring colors

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=114978
Printed Date: 14 Sep 2025 at 11:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: HHC wiring colors
Posted By: bakwoodsfarm
Subject: HHC wiring colors
Date Posted: 20 Nov 2015 at 8:11pm
What are the colors for the wires going to the HHC on L3. Broke the cylinder belt and it pulled the wires out of the plug. I replaced the wires on the head so they are not the same. 
Thanks



Replies:
Posted By: DrAllis
Date Posted: 20 Nov 2015 at 8:36pm
Red is down and there are normally two reds.....blue is raise......three white wires with a stripe(white/orange....white/green.....white/brown) are the low-med-high settings. Your Owners manual has this in a schematic.


Posted By: bakwoodsfarm
Date Posted: 20 Nov 2015 at 9:24pm
my owners manual doesn't have it,  the low-med-high colors is what i need, did you put them in order?



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net