d10 3-point arms
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=113710
Printed Date: 14 Sep 2025 at 9:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: d10 3-point arms
Posted By: Jeff K
Subject: d10 3-point arms
Date Posted: 23 Oct 2015 at 7:40pm
Guys, I am restoring a D10 Series 3. My 3-point hitch arms are in bad shape. The left broken in half and welded together and the right is bent. Does anyone know if these are available anywhere? I am thinking about a bone-yard search but I am not sure if these are common on any other tractors.
Does anyone know anything about these?
Thanks,
Jeff
|
Replies:
Posted By: DiyDave
Date Posted: 23 Oct 2015 at 8:02pm
|
This post would gather more replies in tractor talk... I own a series 3 10 and 12. I think they are unique to 10's and 12's. Not many left in boneyards that I have seen, anyway...
|
Posted By: DSeries4
Date Posted: 23 Oct 2015 at 10:42pm
Those arms were only used on the D10, 12 and 15. Not a high demand item for the aftermarket. Hard to find any that have not been welded up.
I took mine to my local fabrication shop. They can do anything. They cleaned up the reinforcements that the previous owner welded on. Everything got ground down smooth so you can't see where the damage was. The can also straighten things out perfectly.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: Jeff K
Date Posted: 24 Oct 2015 at 1:53pm
|
I think I will go the fabrication shop route.
Thanks guys :)
|
|