Print Page | Close Window

D21 value???

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=113380
Printed Date: 14 Sep 2025 at 6:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D21 value???
Posted By: Gary(WI)
Subject: D21 value???
Date Posted: 16 Oct 2015 at 6:30am
I am thinking about buying a D21 my neighbor has. It is a series one with turbo. It has a 210/220 rearend under it. But he has a D21 rearend that goes with it. Doesn't run currently needs injection pump. Any help appreciated. Gary



Replies:
Posted By: corbinstein
Date Posted: 16 Oct 2015 at 6:35am
I'd offer little better than scrap as the inj. pump may not be all that's wrong now..... Does it run at all?


Posted By: injpumpEd
Date Posted: 16 Oct 2015 at 6:53am
I'd say 3-4000, depending on the condition of all the sheet metal, and such.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!


Posted By: Gary(WI)
Date Posted: 16 Oct 2015 at 7:38am
I heard it run a few years ago. Had to hold a finger over Pump return to make it run though. Sheet metal is pretty good Has 20.8x 38 on it Gary


Posted By: Dswall
Date Posted: 16 Oct 2015 at 8:47am
I agree 3-4000 is a fair price. Start at $3000. There are always hidden expenses.


Posted By: aras
Date Posted: 16 Oct 2015 at 8:58am
Originally posted by injpumpEd injpumpEd wrote:

I'd say 3-4000, depending on the condition of all the sheet metal, and such.

I agree with this -- pictures?


Posted By: WF owner
Date Posted: 16 Oct 2015 at 11:46am
If the rubber is good, you would never find a D-21 in our area for anywhere near that price. Here, I would say about $8000, even if it needs a complete engine rebuild and that's probably low.


Posted By: Dmpaul89
Date Posted: 16 Oct 2015 at 11:48am
well I've never seen one sell recently less than 15k in good operating condition. so if you can buy it for 5k or less you'll have lots of room.


Posted By: Dan Hauter
Date Posted: 16 Oct 2015 at 11:51am
I think you're getting good advice here.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net