7060 PTO Seal
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112923
Printed Date: 14 Sep 2025 at 12:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 PTO Seal
Posted By: dustinmars
Subject: 7060 PTO Seal
Date Posted: 05 Oct 2015 at 8:52pm
| Can anyone tell me his to change the PTO seal on my 7060 I noticed some small leakage since I used to tractor to bush hog this year. Thanks! |
Replies:
Posted By: MACK
Date Posted: 05 Oct 2015 at 9:05pm
| If it is single speed, remove cover and replace seal. If two speed, drain oil, remove bottom cover, remove nut on inner shaft, pull shaft out back, remove 3/8 bolts behind hub, pry hub out as you loosen bolts, and pull hub out. Catch gears when hub comes out. MACK |
Posted By: SHAMELESS
Date Posted: 05 Oct 2015 at 9:26pm
| yep...what Mack says...bush hogging seems to be a little hard on them seals for some reason. have had to do my 7010 a couple times! *hint* when you take the bottom cover off, let drip out overnight...or you'll be wearing a lot of it! (this is ona 2-speed) |
Posted By: dustinmars
Date Posted: 05 Oct 2015 at 9:32pm
Yea I have a two speed 
|