hd6b outboard axel bearing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112908
Printed Date: 27 Jul 2025 at 4:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hd6b outboard axel bearing
Posted By: dragboat1
Subject: hd6b outboard axel bearing
Date Posted: 05 Oct 2015 at 6:25pm
| does any one know the interchange for the outboard bearing on a hd6b .i have linkbelt numbers 19751 3hb94. and race is has 3hb94 . it looks like a double roller bearing with two seprate races. maybe someone has a good one and some seals. thanks |
Replies:
Posted By: Coke-in-MN
Date Posted: 05 Oct 2015 at 10:05pm
|
it's a link-belt bearing and is not interchangeable with anything - a spherical roller bearing rather that tapered like timkins or straight rollers . Might try gemdozer  on here to see if he has any or access to ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: donoman
Date Posted: 06 Oct 2015 at 12:43am
|
that bearing is no longer availible there is one ,I don't have the number handy but you need to machine the output bearing housing to fit it , it is a common size |
Posted By: Dozer
Date Posted: 06 Oct 2015 at 7:41am
|
The bearing on my HD6G is link belt 3HB94-0 As stated the 50mm x 100mm x 42mm bearing does not interchange with anything. 50mm ID spherical roller bearings have 90mm or 110 mm OD's The closest bearing I found was SKF 22310CC/W33 50mmx110mmx40mm. You will have to bore your housing. This bearing is not as wide as the original. On eBay NOW for $116.81 SKF 22310-E 2 indicates spherical next 2 indicates width 40mm 3 indicates diameter 110mm 10 indicates bore 50mm Do not purchase a bearing with -K |
Posted By: dragboat1
Date Posted: 06 Oct 2015 at 9:23pm
| thanks for the input everyone. that is the same # as mine. this is what ill have to do,thanks again for your time and effort. |
Posted By: gemdozer
Date Posted: 07 Oct 2015 at 12:30pm
| HI I should have a used bearing and a new boot seal and ring seals |
Posted By: HD6GTOM
Date Posted: 07 Oct 2015 at 4:57pm
| have you tried Rexco company 515-287-4910 They used to have all kinds of older Link Belt parts. |
Posted By: dragboat1
Date Posted: 09 Oct 2015 at 4:33pm
| MR gmdozer how much for the bearing and seals where i can tell the owner. would you have a extra nut my axel is 6 spline. what are the mesurements of the hex of the nut . we had one made not sure if it is wright size. and how would i get yor money. thanks alot. |