Need bearing and seal for C
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112099
Printed Date: 10 Aug 2025 at 1:25pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need bearing and seal for C
Posted By: Acmichael
Subject: Need bearing and seal for C
Date Posted: 17 Sep 2015 at 2:59pm
Restoring a 1948 model c with tricycle front end. Where can I find bearing and oil seal for front end?
|
Replies:
Posted By: Ted in NE-OH
Date Posted: 17 Sep 2015 at 4:12pm
Take the old parts to any bearing distributor, or NAPA. All bearings and seals in a C are standard off the shelf parts.
------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914
|
Posted By: Hubnut
Date Posted: 17 Sep 2015 at 5:45pm
There are two seals in the front pedestal. One in the bottom (neoprene) below the bearing and one at the top--cork. I've replaced two recently. The ONLY place I could find those seals is from DJs tractors. The upper is 70210289 and the lower is 70210293. I tried to cross reference it to something from NAPA, but never found it. DJs is great to deal with.
|
Posted By: Acmichael
Date Posted: 17 Sep 2015 at 7:26pm
Posted By: RatFink310
Date Posted: 23 Sep 2015 at 5:02pm
Speaking of seals. Where can I find the hydraulic packing (chevron plunger)for the hydraulic ram. I know this may not be the best place to post it but was the closest I could find. I am redoing a 1948 "C" model. Tried Steiner and Yesterday Tractors with no luck.
|
Posted By: MrHDC
Date Posted: 23 Sep 2015 at 6:56pm
I got mine from Schmidt & Sons (AGCO) in Mt Hope, Ks. Ph 800.281.2164 Part # 70222677 $18.85 That's for the rear cylinder. Don't know what they charge to ship - they're within driving distance for me.
Hervey
|
Posted By: RatFink310
Date Posted: 23 Sep 2015 at 8:12pm
Thank you will call them.
|
Posted By: Ted J
Date Posted: 28 Sep 2015 at 1:58pm
RatFink310 wrote:
Speaking of seals. Where can I find the hydraulic packing (chevron plunger)for the hydraulic ram. I know this may not be the best place to post it but was the closest I could find. I am redoing a 1948 "C" model. Tried Steiner and Yesterday Tractors with no luck.  | Try Sandy Lake. I got mine there last year Toll Free: 888-252-0656 Local: 724-376-2489
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17
|
Posted By: Brian Jasper co. Ia
Date Posted: 28 Sep 2015 at 4:25pm
Plus one more on Sandy Lake.
------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|