Calling series 4 owners
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=111564
Printed Date: 13 Sep 2025 at 10:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Calling series 4 owners
Posted By: Josh Day
Subject: Calling series 4 owners
Date Posted: 06 Sep 2015 at 11:31am
|
I have a 64 series four gas. And I don't think it's the original motor. The serial number on mine is 17-53685-M and I was wondering if you guys would mind getting me your engine serial ## no hurry but any help will be appreciated to find out the year on my motor. Or if someone has a web site that has the ser#s on it. Thanks. Oh and here is the crank off of mine. I'd like to find the people who owned it before me. http://s823.photobucket.com/user/joshday1/media/image.jpg2_zpsole0zqie.jpg.html" rel="nofollow">  http://s823.photobucket.com/user/joshday1/media/image.jpg1_zpscftpwzzz.jpg.html" rel="nofollow">  ------------- AC's 75' 7040, 64' D-17S4, 55'WD-45, 54' WD-45, 53' WD-45, 53' WD, 52' CA, 36' WC. IH 656. Deere's 38' A, and 47' A |
Replies:
Posted By: Stan R
Date Posted: 06 Sep 2015 at 3:02pm
|
Serial nos. are on this site. http://www.allischalmers.com/serials.html" rel="nofollow - http://www.allischalmers.com/serials.html Ours is no D17 79103 3pt factory hitch. |
Posted By: Marlyn nwia
Date Posted: 06 Sep 2015 at 4:08pm
| My series IV's serial # is D-17-76815; engine serial # is -56097- |
Posted By: Pete from IL
Date Posted: 06 Sep 2015 at 6:10pm
| Was your crank pulley rattling and making noise? I think your crank is shot unless someone can fix it? |
Posted By: Josh Day
Date Posted: 06 Sep 2015 at 7:12pm
|
Pete, you couldn't tell it untill low idle, but it sounded more like a knock in the motor. And yep it's shot it is worse in person. sooo I will be looking for a new crank.. ------------- AC's 75' 7040, 64' D-17S4, 55'WD-45, 54' WD-45, 53' WD-45, 53' WD, 52' CA, 36' WC. IH 656. Deere's 38' A, and 47' A |
Posted By: jlogli
Date Posted: 06 Sep 2015 at 7:15pm
------------- 1945 WC on full steel, WD wide front, WD45 power steering, 1966 D-17IVfactory 3 point.1967 D-17IV SC. 1973 rotobaler white top. orange top roto, model 90 combine,82S, four bottom plow.302 baler. |
Josh Day wrote:Posted By: eighty nine
Date Posted: 06 Sep 2015 at 8:11pm
We had a WC crank with the same problem fixed by a machine shop in Shelbyville, IL . If the crank is good otherwise it might be worth checking into getting it fixed.
|
Posted By: CTuckerNWIL
Date Posted: 06 Sep 2015 at 8:30pm
|
That nose on the crank can be fixed with a good epoxy. I fixed a flywheel on the back shaft of a 2,500 ton forged press with a Moglice product for static fit. Just takes lining up the pulley and filling the void.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: JoeO(CMO)
Date Posted: 08 Sep 2015 at 8:05pm
|
I have D17IV, serial number 82077, with engine number 17-85405-M. ------------- |
Posted By: Skyhighballoon(MO)
Date Posted: 08 Sep 2015 at 9:32pm
|
Josh - happened to mine back in like 1996/1997 and I ended up having to get a different crank too, couldn't be fixed. Good luck. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |