Shop and repair manuals
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=110059
Printed Date: 07 May 2025 at 6:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Shop and repair manuals
Posted By: Tractorookie
Subject: Shop and repair manuals
Date Posted: 07 Aug 2015 at 2:42pm
Been looking online for a good shop and repair manual for my model C. So many different put together manuals out there. Can one of you experts point me in the right direction to purchase them. Thanks Allis Chalmers !!!
Grant
|
Replies:
Posted By: Mike Plotner
Date Posted: 07 Aug 2015 at 3:30pm
If you can, go with a actual Allis Chalmers manual. I&T can be hit or miss. some are good, some are just ok.
-------------
2001 Gleaner R42, 1978 7060, 1977 7000, 1966 190 XT, 1966 D-17 Series IV and 1952 WD and more keep my farm running!
|
Posted By: jaybmiller
Date Posted: 07 Aug 2015 at 3:34pm
The more the better. One manual won't cover everything you will need to know. Sometimes it's just a picture that shows you , ah ha THAT's how it goes.... or oops hmm, wrong way round.
Also when working on anything, take a few pictures from different angles. You'll be happy you did, especially if your repair is interrupted and you,um, er, forget where this was connected to !
Yes, done all of the above...
Jay
-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
Posted By: HD6GTOM
Date Posted: 07 Aug 2015 at 5:00pm
|
I have a reprint of an original AC manuel for my 200. most of the pictures are black and unreal. Some of the pages are out of order. I don't know who printed it but am glad it came with the tractor and I did not pay for it. moral of this story get an original 1 even if you have to pay more.
|
Posted By: CTuckerNWIL
Date Posted: 07 Aug 2015 at 5:33pm
I have one of the dreaded combination manuals from IT. It's all I ever used on the G, B, WD45 and CA and includes the C and 45Diesel.
I did a complete every nut and bolt rebuild of Lena using this just wish I had taken better pictures along the way.
Some don't like these, but there are very few things missing if you learn how to use it.
Take a look at your email.
A copy of the Allis B-C manual is for sale cheap here with free shipping. http://www.ebay.com/itm/ALLIS-CHALMERS-B-C-TRACTORS-SERVICE-SHOP-REPAIR-MANUAL-ENGINE-CARB-TRANS-FUEL-/161002168488" rel="nofollow - http://www.ebay.com/itm/ALLIS-CHALMERS-B-C-TRACTORS-SERVICE-SHOP-REPAIR-MANUAL-ENGINE-CARB-TRANS-FUEL-/161002168488
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Don(MO)
Date Posted: 07 Aug 2015 at 5:41pm
Here you go. This is from AGCO.
http://www.agcopubs.com/allis_chalmers/service_manual/english/79003403/b_c_ca_g_tractor" rel="nofollow - http://www.agcopubs.com/allis_chalmers/service_manual/english/79003403/b_c_ca_g_tractor
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: Dan73
Date Posted: 07 Aug 2015 at 6:08pm
|
Agco pubs is the best they are oem. I have ordered from amazon with good results for oem manuals as well. When I got all my equipment a couple of years ago I order all the Case New Holland and yes one JD manuals from amazon all of them where good clean manuals. My allis chalmers manuals come from agco parts they are clearly reprints from older scans but you can read them ok. I guessing the original documents are long gone for these old tractors.
|
Posted By: TramwayGuy
Date Posted: 07 Aug 2015 at 6:40pm
|
I have purchased manuals for older equipment from AGCO, but they are not up to the readability of the older printed manuals, even though they are exactly the same content. I suspect that the new ones are printed from scans of the old ones; but they were scanned as 'black-and-white' rather than 'grayscale' because it uses less memory. The photos just were crappy.
|
Posted By: Tractorookie
Date Posted: 07 Aug 2015 at 7:37pm
|
Thank you for all the great info. I ordered a few different ones from a few different sites. Figure I could use them all , start the collections. Thanks guys !!!!
|
Posted By: Gerald J.
Date Posted: 08 Aug 2015 at 9:58am
There is an Allis Chalmers service manual covering several tractors on line for free at
http://www.henselfamilyfarms.com/wp-content/uploads/2013/02/Allis-Chalmers-G-B-C-CA-Service.pdf
that is fairly thorough.
I&T isn't big enough for a door stop, but is a little thick for a marker in a real shop manual. My Deere dearly 4020 shop manual is nearly an inch and a half thick and the I&T for that vintage Deeres covers at least half a dozen models in 100 pages.
A parts book is often more informative on assembly order than the service manual, and the operator's manual generally covers standard maintenance like valve setting better than the service manual.
Gerald J.
|
Posted By: Dakota Dave
Date Posted: 08 Aug 2015 at 1:53pm
|
I got my B/C/IB service manual and parts manuls from 3000toys. just go to the top of the screen and click Allis Store and got to manuals. they are nice clean reproductions of the allis manuals. When I ordered mine many years ago they came within a few days.
|
Posted By: CTuckerNWIL
Date Posted: 08 Aug 2015 at 2:33pm
That manual isn't listed anymore that I can see.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Tractorookie
Date Posted: 08 Aug 2015 at 4:08pm
|
Found a few different ones online downloads, but ordered as many factory binded manuals , parts diagrams and service manuals I could find for sale. None of those printed from home crap on eBay. They weren't to bad to find , not like the two year hunt to find a factory manual/service for my 903ci turbo cummins motors.
|
|