Big-10 with rototiller
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10970
Printed Date: 28 Apr 2024 at 12:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Big-10 with rototiller
Posted By: bufford-t
Subject: Big-10 with rototiller
Date Posted: 12 Apr 2010 at 3:17pm
I recently have gotten an Allis Chalmers Big-10 Garden Tractor, along with the 32" rear mount rototiller. I have found that I am missing the "clutch" assembly and the pulley which mounts on the tractor itself.
It looks like I have the rototiller and the mount tube, along with an complete gear case, but none of the hardware needed to connect the belts to the tractor itself. I believe the clutch assembly or what I am calling the clutch assembly has an 8 inch pulley, with a 4 inch pulley on a reducer which mounts to the rear of the tractor. Then the belt runs under the seat to a 3 or 4 inch drive pulley. The 8 inch has a push rod that engages the belts to make the rototiller turn. Does anybody have or know of someone with these parts??
Thanks!
|
Replies:
Posted By: Dakota Dave
Date Posted: 13 Apr 2010 at 3:40pm
|
Try over at simpletractors.com look in the classified section.
|
Posted By: bufford-t
Date Posted: 14 Apr 2010 at 3:18pm
Posted By: derek85
Date Posted: 16 Apr 2010 at 10:38pm
|
i have the whole tiller with every thing 150 $ its yours if wanted call 330-680-4722 ask for derek 1963 b-10 allis chalmers also the tractor and snow blower with all parts will take 450 for all or will piece out
|
Posted By: derek85
Date Posted: 16 Apr 2010 at 10:39pm
|
i have the whole tiller with every thing 150 $ its yours if wanted call 330-680-4722 ask for derek 1963 b-10 allis chalmers also the tractor and snow blower with all parts will take 450 for all or will piece out
|
Posted By: bufford-t
Date Posted: 13 May 2010 at 2:25pm
|
Your Rototiller, does it have the belt/pulley assembly that goes on the tractor and between the drive pulley on the rototiller too? I can most likely find the pulley for the tractor, but am in need of the clutch/step down belt system between the two.
|
|