Adding fluids for my 7060
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=109448
Printed Date: 21 Aug 2025 at 9:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Adding fluids for my 7060
Posted By: dustinmars
Subject: Adding fluids for my 7060
Date Posted: 25 Jul 2015 at 1:17pm
|
Recently got a 7060 for mowing and I need to know where to check/add fluids for hydraulics and transmission. Thanks!
|
Replies:
Posted By: SIMPLICITY
Date Posted: 25 Jul 2015 at 2:00pm
|
YOU HAVE A DIP STICK IN THE CAB AND ON THE LEFT SIDE IF THE DIFF. HSG THERE 2 SIGHT GLASSES THEY ARE IN THE BACK OF THE TRACTOR BY THE TIRE. THEY CAN BE REMOVED AND CLEANED. !!!!!!! JUST REMEMBER THEY ARE GLASS A 3/4 SOCKET WILL FIT TO REMOVE THEM
|
Posted By: DrAllis
Date Posted: 25 Jul 2015 at 6:46pm
|
Dipstick in the cab is for the transmission. Sight glasses on the rear end are for the hydraulics.
|
Posted By: darrel in ND
Date Posted: 25 Jul 2015 at 10:55pm
|
correct me if I am wrong, but me thinks that on my black belly powershift 7060, there is a transmission oil dipstick that is under the cab, not in the cab, faceing the back end of the tractor, and then the two site glass bulbs for the hydraulic oil. Darrel
|
Posted By: DrAllis
Date Posted: 26 Jul 2015 at 6:20am
|
NOPE. Dipstick for transmission is always in the cab on 7000 series. 8000 series was moved out of the cab because the cab itself was moved forward a bit.
|
Posted By: dustinmars
Date Posted: 26 Jul 2015 at 11:11am
|
Thanks for the info guys! I do have a dipstick in the cab and two sight glasses. Where would the drain plug be for transmission/hydraulic fluids? Any recommendation on the fluid I should replace with. And before I try and clean my sight glasses can you purchase new ones in case I break one?
|
Posted By: MACK
Date Posted: 26 Jul 2015 at 2:50pm
|
Three places to drain rearend-hydraulics. One on bottom of each planatary , and one in between. The trans, depends if a PS or PD. Either one, there is a cover under and to rear of trans with 6 bolts that needs removed and a screen to clean out. Have a pan at hand for there will be oil there. Most can be drained out of plug on side if a PS or steel line if a PD. MACK
|
|