210 220 7000 series wheel push bolt thread size
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=108340
Printed Date: 11 Sep 2025 at 6:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 210 220 7000 series wheel push bolt thread size
Posted By: AndrewGubbels
Subject: 210 220 7000 series wheel push bolt thread size
Date Posted: 01 Jul 2015 at 6:54am
Hey guys Does anyone know what the threads are on the pusher bolts for the latest style cast wheel wedges? As on a 210 220 7010 on up through the 8550? I tried a 7/8 Standard thread and Fine and it is something different. Any thoughts? Thank you!
Andy
-------------
Andrew Gubbels
Gubbels Restoration
|
Replies:
Posted By: injpumpEd
Date Posted: 01 Jul 2015 at 7:03am
they are 7/8" but an odd thread, I think 12 is the pitch.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: Butch(OH)
Date Posted: 01 Jul 2015 at 7:07am
|
Seems to me it was posted that some Case/IH uses same 7/8-12? Might try there if they are closer than AGCO
|
Posted By: injpumpEd
Date Posted: 01 Jul 2015 at 7:55am
I just looked at my tap for this, and it is indeed 7/8"-12.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: Kevin in WA
Date Posted: 01 Jul 2015 at 9:14am
|
It is special, I bought a tap from Enco years ago for this, I will check to see what it is.
|
Posted By: AndrewGubbels
Date Posted: 01 Jul 2015 at 9:57am
Great! Thanks for the input guys! Always appreciate everyone's help!
Andy
-------------
Andrew Gubbels
Gubbels Restoration
|
Posted By: Calvin Schmidt
Date Posted: 01 Jul 2015 at 2:57pm
I found that there is a thread that is called 'Industrial thread' that is neither coarse or fine. Found it on the adjusters on roller mills that I sell. More heavy duty but not well known. Could that be it?
-------------
Nothing is impossible if it is properly financed
|
Posted By: Unit3
Date Posted: 01 Jul 2015 at 3:47pm
How many do you want?
-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
|