Farm Equipment - 8010 wont go into 6 the gear...

Print Page | Close Window

8010 wont go into 6 the gear...

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=108303
Printed Date: 11 Sep 2025 at 8:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8010 wont go into 6 the gear...

Posted By: cotncrzy
Subject: 8010 wont go into 6 the gear...
Date Posted: 30 Jun 2015 at 2:57pm

My 8010 wont go into 6th gear, 5th is hard. Still goes into reverse fine. Cant see anything obvious behind batteries, nothing loose, etc. It was fine and just all at once wouldn't go... Shifter is in the gear it represents, in other words it not bottoming out in slot. It is in the gear it shows.

-------------
C, WD45,WD puller, 185, 200, 7060 Red Belly, 7060 Black Belly,8010, and a R52 Gleaner, AND PROUD OF THEM!

Replies:

Posted By: Johnwilson_osf
Date Posted: 30 Jun 2015 at 5:37pm

I am assuming this is a Powershift model. Sounds to me like the shift cable has come out of its hold downs under the cab. Pretty easy fix.

-------------
Allis Express: Eastern PA on Rt 80
8050, 8010, 6080, 190, D14, DA 6035, AA 6690, 5650, Gleaner F2

Posted By: Unit3
Date Posted: 30 Jun 2015 at 6:29pm

A zip tie broke inside the console.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C

Posted By: DrAllis
Date Posted: 30 Jun 2015 at 7:32pm

If the clutch pedal isn't coming all the way up, you'll have that. Also, the clutch pedal cable could be the issue.