'36 WC rims spoked or not
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=107814
Printed Date: 11 May 2024 at 5:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: '36 WC rims spoked or not
Posted By: AC-Guy1944
Subject: '36 WC rims spoked or not
Date Posted: 19 Jun 2015 at 3:24pm
| I have a '36 unstyled WC it needs new rims. I am trying to get it as original as possible. I dont know if it had round spoke, flat spoke, or ones like my '44 has from factory. I have a set of flat spoke for it one is a 13-24 the other is 11-28 I dont know much about the rear rims. I do know the flat spoke were not originally rubber but thats about it. if it helps any the serial number is WC56701. |
Replies:
Posted By: TomMN
Date Posted: 19 Jun 2015 at 3:55pm
|
Yours is a 1937 WC, the serial numbers from
31784 to 60789 were the 1937 year tractors. 59635 was the last to get the round spoke rear wheels, 59636 and up unstyled WC had the 24 inch disc wheels. So your 56701 would have had the round spoke 24 inch wheels if it was shipped with rubber tires. The front wheels should be the 6 bolt type. |
Posted By: CTuckerNWIL
Date Posted: 19 Jun 2015 at 5:17pm
|
Tom, where do you find the break in serial numbers for different parts. Would it be listed in a parts book? ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Alberta Phil
Date Posted: 19 Jun 2015 at 5:27pm
| Terry Dean's book has that info. |
Posted By: CTuckerNWIL
Date Posted: 19 Jun 2015 at 6:36pm
OK, thanks Phil. I guess I NEED to clean my desk and organize my books cause right now I DON'T EVEN KNOW WHERE THAT ONE IS 
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: TomMN
Date Posted: 19 Jun 2015 at 9:12pm
| Yes, Terry Dean's book is where I got the wheel information. |