8050 trans light on all the time
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=107695
Printed Date: 10 Sep 2025 at 8:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8050 trans light on all the time
Posted By: Joe(IA)
Subject: 8050 trans light on all the time
Date Posted: 16 Jun 2015 at 6:59pm
|
History: Bought this tractor 1 1/2 years ago. Changed all filters then. Tractor is a pd with 3700 hours and has a good maintenance history. I am the third owner. This tractor just cuts stalks. So no heavy tillage. Prior two owners used it as his primary tillage tractor. Transmission light came on towards the end of cutting stalks. Fluid level is fine. Looks and smells fine. No issues other than light on no matter what rpm. I know Dr Allis on a prior post asked if the owner was warned by the light. Possible screen plugged?
|
Replies:
Posted By: Orange Blood
Date Posted: 16 Jun 2015 at 7:31pm
If your oil looks smells, tastes and feels fine, more than likely one of those squirrelly stalks caught the light wire, and pulled it, or damaged it and the wire is grounded out to the chassis somewhere. If you have gauges you can check your pressures to be sure you don't damage something.
-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7
|
Posted By: Joe(IA)
Date Posted: 16 Jun 2015 at 8:28pm
|
Thanks, I will do a little investigating
|
Posted By: skipwelte
Date Posted: 16 Jun 2015 at 9:37pm
|
I had a 7020 PS we chased a dim trans pressure lite. The sender is behind the fuel tank, we removed the tank (after a new pump didnt fix the problem) and found where the wire runs over the trans it had rubbed the insulation off and would partially ground out. Since your doing stalks Id hold out for the wire being pulled off. Good luck
|
Posted By: Joe(IA)
Date Posted: 17 Jun 2015 at 6:31am
Posted By: Lynn Marshall
Date Posted: 17 Jun 2015 at 7:05am
|
Is this the trans temp or trans pressure light?
|
Posted By: Joe(IA)
Date Posted: 17 Jun 2015 at 5:02pm
Posted By: Lonn
Date Posted: 18 Jun 2015 at 6:14am
My 7050 had the light on most of the time recently. I had it in a local shop to get some hydraulic valve work done and mentioned that light. It was a head scratcher the little time I looked for a cause. It was a head scratcher for the shop too but they found the little connector at the light was a bit loose and they just pushed on it and it works fine now but I may need a new light sometime in the future.
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|