Allis G Fan, Generator & Crank Pulley-Not Aligned
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=107629
Printed Date: 26 Jun 2025 at 8:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis G Fan, Generator & Crank Pulley-Not Aligned
Posted By: nowaktj
Subject: Allis G Fan, Generator & Crank Pulley-Not Aligned
Date Posted: 15 Jun 2015 at 11:35am
Hi Guys-I picked up this tractor as a basket case. This are was resassembled before I got it. I noticed the belt is not running true between the three pulleys. It appears the generator is out of location. Has anyone ran into this issue before? Let me know your thoughts. Thanks. ------------- D19D, D17D, WD, WC, Snobee, #83 Plow, SC Blade, 14' disk, 400 series planter, B , Terra Tiger, M Dozer w/Baker Blade, TL-12, 42S Grader, G |
Replies:
Posted By: Gerald J.
Date Posted: 15 Jun 2015 at 12:53pm
|
Add some shims to shift the generator position, or its pulley position. The generator is on a bent steel bracket, slot the holes that hold it to the block, or maybe just reverse it. I had to do that mounting an alternator on one of my tractors. Slotted holes worked fine. Gerald J. |
Posted By: Ted in NE-OH
Date Posted: 15 Jun 2015 at 3:57pm
|
The pulley may be on the generator backwards. ------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: nowaktj
Date Posted: 15 Jun 2015 at 4:34pm
|
You nailed it. It is on backwards. Thanks. ------------- D19D, D17D, WD, WC, Snobee, #83 Plow, SC Blade, 14' disk, 400 series planter, B , Terra Tiger, M Dozer w/Baker Blade, TL-12, 42S Grader, G |
Posted By: JoeO(CMO)
Date Posted: 15 Jun 2015 at 4:38pm
|
Agreed 3. Flip the pulley, you'll be good to go ------------- |