All Crop 66 value
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=107604
Printed Date: 11 Sep 2025 at 5:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All Crop 66 value
Posted By: littlemarv
Subject: All Crop 66 value
Date Posted: 14 Jun 2015 at 8:03pm
|
I found an all crop 66 for sale, its been sitting outside for a few years, they used it for several years before putting it aside an getting something different. So, I'm hoping its mechanically O.K., but is there anything I should be looking for if I get a chance to go look at it next weekend? Didn't I read somewheres that some of them the wheels were on bushings rather than bearings? The reason I ask is it's located 5 MILES from my fathers house. Thats only 26,400 feet! I think logic demands that I buy it just on proximity alone! I have no use for one, I've never had a stranger come up to me and ask me to combine his oats (yet), but boy, I hate to see it go to scrap. If I could fix it up, not necissarily restore it, it sure would be neat to have.
Any guesses as to what its worth? How much does one weigh?
Thanks. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Replies:
Posted By: Orange4ever
Date Posted: 14 Jun 2015 at 8:28pm
|
Does it have the canvas in good shape, that's one of many things to ask about. Check for rust in the cylinder and the doors on the elevators, and anyplace else on the combine, that's the biggest thing to check for. Also check the elevators for dirt dobers and make sure they're clean. Check the cylinder bars for damage and how much rubber is left on them. When you can, pics help and let us know how it looks when you go to see it, good luck! ------------- If you want a man to be a successful farmer, give him a Allis Chalmers tractor. If you want him to be a successful mechanic, give him a John Deere |
Posted By: KenBWisc
Date Posted: 15 Jun 2015 at 8:13am
|
Yes, wheels are on bushings. A few years ago I drug one home from just west of Marshfield, forty some miles, that had been roaded up there from Portage. Keep plenty of grease in the bearings and go slow! ------------- '34 WC #629, '49 G, '49 B, '49 WD, '62 D-19, '38 All Crop 60 and still hunting! |
Posted By: jiminnd
Date Posted: 15 Jun 2015 at 10:23am
|
No opinion on value but if it is only 5 miles, take a tractor and grease the wheels and pull it home a 10mph and it shouldn't be much different that pulling it around a field all day. ------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner) |
Posted By: Sugarmaker
Date Posted: 15 Jun 2015 at 10:54am
|
I sold one (72 all crop) last spring that had been inside for $300. Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: Dmpaul89
Date Posted: 15 Jun 2015 at 12:36pm
| My 72 has wheel bushings, pulled it 150 miles. greased every 30 miles or so. Your fine. you'll spend more on the canvass than the combine is worth if its bad. but if you have the means id say save it! look for optional features such as dual wheels, scour kleen, big bin, pick up header, all those add value. they take a LOT of grease, make sure you lube everything before running. |
Posted By: SC Dan K.
Date Posted: 15 Jun 2015 at 5:34pm
| I vote to try to save it. Even if you can't buy canvases and use it yourself someone else might want it. This is why I have a Minneapolis Moline model 69 pull type combine with auxiliary engine in a barn. It is never been rained on and I just couldn't let it go for scrap. I'll never use it the magneto is gone off the engine and the canvases are shot. But if anybody knows of anybody it would help could work something out. |
Posted By: littlemarv
Date Posted: 15 Jun 2015 at 6:32pm
|
Maybe for fathers day I will take my father and he can help give it the once over. I asked him and he used to run one quite a bit when he was younger. Hell, it might even BE the one he ran...... we'd better go look.
I looked through the 186 page parts book over on allcropharvester.com last night, there is a lot of parts to one of these and looks like a blast to setup and operate.
------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: TomYaz
Date Posted: 15 Jun 2015 at 6:47pm
|
in WI, $500 would be a SWAG. Depends on condition. What the guys said..Also, Look under the concave, make sure not patched/etc.
------------- If its not an All-Crop, it all crap! |
Posted By: littlemarv
Date Posted: 16 Jun 2015 at 3:43am
|
What is a SWAG, what is a scour clean, how do I tell if its a big bin?
The duals and pickup header I should be able to spot.
My the canvas is spendy. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: TomYaz
Date Posted: 16 Jun 2015 at 5:35am
Super Wild Ass Guess
Scour Kleen - cylindrical grain cleaner mounted on top of the grain tank.
Canvas - Yep not cheap...Find a company that does awnings or a Amish who does that kind of work and you might get it done cheaper. Will be inferior though as it wont be rubbereized.
------------- If its not an All-Crop, it all crap! |
littlemarv wrote:Posted By: macvette
Date Posted: 16 Jun 2015 at 8:57am
|
Ryan: Will you need an unstyled WC now to pull it?
|
Posted By: littlemarv
Date Posted: 16 Jun 2015 at 2:34pm
|
An unstyled WC would be nice...... I'm working on it. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: littlemarv
Date Posted: 18 Jun 2015 at 9:01pm
|
Whats a scour clean for one of these worth? ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: TomYaz
Date Posted: 19 Jun 2015 at 6:43am
|
Depends on condition. NOS in the crate went for $500...good used...$100-200? ------------- If its not an All-Crop, it all crap! |
Posted By: littlemarv
Date Posted: 19 Jun 2015 at 3:29pm
|
Where is the serial number located on these machines? ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: littlemarv
Date Posted: 21 Jun 2015 at 4:10pm
|
Well, its a big bin 66 with scour clean. And it is in very good shape, other than the lower canvas is gone and the upper is shot. Serial number B67020. Can anyone tell me the year, or any other information from the serial number? Thanks. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: TomYaz
Date Posted: 21 Jun 2015 at 4:23pm
|
1957 ------------- If its not an All-Crop, it all crap! |
Posted By: littlemarv
Date Posted: 24 Jun 2015 at 7:39pm
|
I was watching some videos on youtube, found one where a 60 had tandem wheels on it. Not duals, but a tandem walking beam setup. Was this an option, or a aftermarket add on? ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: DiyDave
Date Posted: 24 Jun 2015 at 7:47pm
| I believe it was an option for the 60, think I remember seeing it in the 60 operator's manual... |
Posted By: TomYaz
Date Posted: 24 Jun 2015 at 7:50pm
|
option ------------- If its not an All-Crop, it all crap! |
Posted By: littlemarv
Date Posted: 24 Jun 2015 at 7:50pm
|
Just found another picture of the tandem setup, are these rare? Is there any other purpose besides smoother ride on a rough field? ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |