Farm Equipment - B/C Dam Gasket & PTO Sleeve

Print Page | Close Window

B/C Dam Gasket & PTO Sleeve

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=107367
Printed Date: 21 May 2025 at 2:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: B/C Dam Gasket & PTO Sleeve

Posted By: Steve79
Subject: B/C Dam Gasket & PTO Sleeve
Date Posted: 09 Jun 2015 at 10:55am

Can you still purchase the dam gasket for the PTO housing of a B or C? I checked with 2 vendors that said its unavailable. If it is unavailable how are your guys making them?

Also has anyone put a speedi Sleeve on a 1 1/8 PTO shaft and a new seal? If so what size did you order? I measure 1.194" on the PTO shaft where the seal would go and there isn't a sleeve that exactly matches. My PTO shaft is an old one with the grove machined in it for use with a leather seal.

Speedi Sleeve Sizes
1.123 to 1.127 - I assumed I would want this one
1.179 to 1.184
1.185 to 1.190 close enough? I measure 1.194
1.247 to 1.253

Also how do you get your sleeve so far on a PTO shaft when the tool it comes with is too short, hammer and punch?

Replies:

Posted By: sparky
Date Posted: 09 Jun 2015 at 1:56pm

I made one out of pvc pipe to set a speedy sleave on the front crank seal on my 45.

-------------
It's the color tractor my grandpa had!

Posted By: Steve79
Date Posted: 09 Jun 2015 at 8:55pm

Thats lucky a PVC pipe was just the right size. Thanks

Posted By: Ted in NE-OH
Date Posted: 09 Jun 2015 at 10:16pm

Gasket available from Sandy Lake Implement 1-888-252-0656. Great people to deal with. They know ORANGE!!

-------------
CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914

Posted By: Steve79
Date Posted: 10 Jun 2015 at 7:25am

ok thank, hadn't tried them yet.