Copper line and fitting for Oil Pressure
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=105806
Printed Date: 12 May 2025 at 1:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Copper line and fitting for Oil Pressure
Posted By: Allis-Chalmers Damon
Subject: Copper line and fitting for Oil Pressure
Date Posted: 07 May 2015 at 10:15am
|
Does anybody here know a good place to find a replacement copper oil pressure line with the fittings? I bought a new Allis-Chalmers oil pressure gauge but my old fitting split and I would like to get the entire replacement if possible.
Or does anybody know of an alternative oil pressure setup? I'm working on the 55' WD45 Diesel.
Thanks!
-------------
1955 WD45 Diesel, 1959 D14, All-Crop Drill, 2015 John Deere 5075e, New Holland 279 Haybine, New Holland 575 square baler, New Holland 1032 Stackliner, 10ft Industrias Disc, 6ft Titan grapple
|
Replies:
Posted By: Stan R
Date Posted: 07 May 2015 at 10:28am
|
Just bought a month ago the copper line with the fittings as a kit at our local autozone store. Had all the fittings plus a few extra sizes that were not needed. About $12. For a D17 IV.
|
Posted By: Allis-Chalmers Damon
Date Posted: 07 May 2015 at 10:36am
Perfect thanks! I tried NAPA and they didn't have anything....will try Autozone today.
-------------
1955 WD45 Diesel, 1959 D14, All-Crop Drill, 2015 John Deere 5075e, New Holland 279 Haybine, New Holland 575 square baler, New Holland 1032 Stackliner, 10ft Industrias Disc, 6ft Titan grapple
|
Posted By: Stan R
Date Posted: 07 May 2015 at 10:43am
http://www.autozone.com/gauges-and-gauge-accessories/gauge-hardware/equus-copper-tubing-kit/39190_0_0/
Part number 9901 $12.99 in stock out here in MA if you want to take a nice drive!
|
Posted By: 1953CA
Date Posted: 07 May 2015 at 10:46am
NAPA does have it, its by the gauges in a kit...
-------------
1945 AllisCletrac / 1948 "B" / 1953 "CA" / 1955 "WD-45" / 1963 "D-15 Series II"
"No Air Support without Ground Support"
|
Posted By: Allis-Chalmers Damon
Date Posted: 07 May 2015 at 10:48am
|
Might take the Harley on a cross-country trip haha.
Are these lines fairly easy to bend?
-------------
1955 WD45 Diesel, 1959 D14, All-Crop Drill, 2015 John Deere 5075e, New Holland 279 Haybine, New Holland 575 square baler, New Holland 1032 Stackliner, 10ft Industrias Disc, 6ft Titan grapple
|
Posted By: 1953CA
Date Posted: 07 May 2015 at 10:51am
Auto Zone is cheaper...
-------------
1945 AllisCletrac / 1948 "B" / 1953 "CA" / 1955 "WD-45" / 1963 "D-15 Series II"
"No Air Support without Ground Support"
|
Posted By: 1953CA
Date Posted: 07 May 2015 at 10:51am
Yes, real easy to bend/shape
-------------
1945 AllisCletrac / 1948 "B" / 1953 "CA" / 1955 "WD-45" / 1963 "D-15 Series II"
"No Air Support without Ground Support"
|
Posted By: Dave(inMA)
Date Posted: 07 May 2015 at 11:42am
You'll want to be careful if you need to bend the line around any tight radius curves. It's really easy to have the line crimp/flatten on you. Ask me how I know!
Find some round shapes about the needed curvature and bend the line around same. Or get hold of a line bending tool; the parts stores should have them.
-------------
WC, CA, D14, WD45
|
Posted By: dustinmo
Date Posted: 07 May 2015 at 9:51pm
|
if you look on ebay they have them and are around 8-9 bucks free shipping, just bought one about 2 weeks ago for the 615
|
Posted By: Steve in NJ
Date Posted: 08 May 2015 at 5:28am
For that small of tubing, an aresol can works sweet for making bends that are nice n' smooth...
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: Don(MO)
Date Posted: 08 May 2015 at 7:47am
Two things to watch when you replace/build that oil line, use steel line and bend a full 360* round loop and re-bolt the line to the air cleaner mounting bracket.
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|