B oil leak
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102855
Printed Date: 09 Sep 2025 at 12:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B oil leak
Posted By: mweiland
Subject: B oil leak
Date Posted: 06 Mar 2015 at 3:05pm
|
hello, I have a 38 allis b that has some oil coming out through the clutch inspection plate. I was speaking with my uncle about it and he seemed to think you may change that seal from on the crank side without splitting the tractor. I have never done either, and our repair manual is snowed in at the cabin. ? 1.what is the name /part number for said seal. ? 2. do you have to split the tractor to replace it. thanks for any help , Matt
|
Replies:
Posted By: rpropst
Date Posted: 06 Mar 2015 at 3:46pm
You will have to split your tractor. remove clutch/ flywheel/ oil pan and seal retainer. You will need a cork rear main seal a seal retainer gasket and an oil pan gasket
-------------
1950 snap coupler B 1948 WD 1951Ca 1952B 1952adjustable axel B
|
Posted By: mweiland
Date Posted: 06 Mar 2015 at 7:41pm
Posted By: DSeries4
Date Posted: 06 Mar 2015 at 8:56pm
You might also want to change the seal on the shaft going into the torque tube while you are at it. I've seen those leak as well.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|