Ford Industrial engine
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102495
Printed Date: 20 Jun 2025 at 6:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ford Industrial engine
Posted By: Rod in MN
Subject: Ford Industrial engine
Date Posted: 26 Feb 2015 at 8:08am
Hi Guy's I'm looking for engine parts for a ford Industrial engine. What is the difference between the industrial engine and one in a Ford car it is a 1.1 liter engine in a OMC Mustang 345 Skid Street ??
Thanks
Rod
|
Replies:
Posted By: DiyDave
Date Posted: 26 Feb 2015 at 8:17am
|
Most industrial ford motors were gas 134 CI, 172CI, or 196?CI. A few applications also used a pinto motor. Look on the valve cover, should have an ID plate, midway down the side of it, IIRR.
|
Posted By: DrAllis
Date Posted: 26 Feb 2015 at 8:18am
|
Usually, Industrial engines have forged pistons, stellite exhaust valves and a steel crankshaft, etc, etc. They aren't the same, even tho they might look the same to you. In the case of a GM 350 V-8 they even had 4 bolt main bearing caps on the Industrial version.
|
Posted By: Fred in Pa
Date Posted: 26 Feb 2015 at 8:43am
Not sure what is Difference ,They do have 5 Or 3 main bearings .Not all 1.1 have same bores . One of the engine suppliers that I am a dealer for has the parts for them .
Send me a PM with what you need and I can give you price .
-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
Posted By: steve(ill)
Date Posted: 26 Feb 2015 at 8:54am
I would bet the cam shaft / valve overlap and timing are different for a constant speed motor (2000 RPM) compared to a car.
-------------
Like them all, but love the "B"s.
|
Posted By: Allen Dilg
Date Posted: 26 Feb 2015 at 1:19pm
|
Hello Rod Need to know the model? Have 2 small Ford motors on high crop sprayers.
|
Posted By: Rod in MN
Date Posted: 26 Feb 2015 at 1:44pm
Allen This is what I got from father in law of the valve cover
HD,P Block,1C
Date-Serial# E1268-100
Build# Z-320-TK5-200
1.1L Ford Industrial engine. What is the difference with ford engines and ford Industrial engine. Parts for the Industrial engines is higher $
and harder to find. NAPA can not find them or get them. Auto engines can find all over ??
Thanks Rod
|
Posted By: TramwayGuy
Date Posted: 26 Feb 2015 at 4:57pm
|
I think the 1.1 is a British made engine. Not the same as a Pinto engine that was 2.3L
|
|