Farm Equipment - Agco Allis 5650

Print Page | Close Window

Agco Allis 5650

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102092
Printed Date: 08 Nov 2025 at 7:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Agco Allis 5650

Posted By: Johnwilson_osf
Subject: Agco Allis 5650
Date Posted: 17 Feb 2015 at 3:32pm

Greetings all,

Anyone happen to have a 4-hole rim for an Agco 5650? The rim is W11x28, for a 13.6R28 tire. Agco made a 6 hole model as well, but I need the 4 hole. It has the z-stlye mounting flanges offset from the center of the rim.

OR anyone know a salvage yard on the east coast that might have one? I have called

Wengers of Myerston (PA)

Frys Machinery (PA)

Tractor Parts Asap

Worthington Ag

Thanks in advance

-------------
Allis Express: Eastern PA on Rt 80
8050, 8010, 6080, 190, D14, DA 6035, AA 6690, 5650, Gleaner F2

Replies:

Posted By: Mike Plotner
Date Posted: 17 Feb 2015 at 4:12pm

might give Anderson tractor in Bluffton Ohio a call, they have a good variety. although it may be a drive

-------------
2001 Gleaner R42, 1978 7060, 1977 7000, 1966 190 XT, 1966 D-17 Series IV and 1952 WD and more keep my farm running!

Posted By: tbran
Date Posted: 17 Feb 2015 at 8:16pm

unverferth mfg 419-532-3121

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: Johnwilson_osf
Date Posted: 19 Feb 2015 at 6:45pm

So local Agco said they could get me a new rim. $371. At that price, I figured it won't kill me. As it was, no salvage yards could find me a used one. Dealer calls me up and says that it is the wrong one. They got a rim with rails instead of the brackets that this one has. To top it all off, when I get the wheel bolts today, they are not the bolts that hold the rim to the center. I have no idea what they go on, but it is definitely not this tractor.

I have a local guy welding the bracket to back on the rim, so it should be good as new, but will likely cost about the same as the new rim I was supposed to get. Was looking online tonight, and turns out there is a salvage 5650 in Missouri for $1500, with a hole in the engine. At that price, I can have parts galore.......

-------------
Allis Express: Eastern PA on Rt 80
8050, 8010, 6080, 190, D14, DA 6035, AA 6690, 5650, Gleaner F2

Posted By: ng5z
Date Posted: 19 Apr 2017 at 8:36am

I just found an inexpensive solution to this problem with my 5650.

This aftermarket 8-loop rim is a direct bolt-on to the original 5650 4-loop wheel center:

http://www.worthingtonagparts.com/Miscellaneous-Rim-13-x-28-Rear-NEW-WN-RW13288

Used 5/8" x 2.88" rim-to-center bolts such as these:

http://www.yesterdaystractors.com/S04352_Bolt-and-Nut-Kit-Rear-Rim-to-Wheel-Center_14587.htm

Origiinal 13.6" x 28 tires fit fine, adds an inch or so width to outside.

Posted By: allisrutledge
Date Posted: 19 Apr 2017 at 11:22am

Might want to check with Dale at Mayer equipment in Jeffersonville oh .

-------------
Allis Chalmers still exist in my mind and barns