M 100 B Grader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=102017
Printed Date: 25 Jul 2025 at 10:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: M 100 B Grader
Posted By: kodiak2
Subject: M 100 B Grader
Date Posted: 15 Feb 2015 at 9:47pm
HI,
I bought a AC M 100 B grader with a wing. Have no serial # as they removed it when they installed the wing. The wing is off and when I went to use it, it would run for about 2 minutes and then quit although starting right up again and repeating the problem.Had the injectors and pump rebuilt, but haven't got it altogether yet. Needs a lot of work including blade hydraulic cylinder rebuilding. Anyone have any advice on rebuilding the engine and other parts? I'm a retired crane operator and have run Cat 16G graders but don't claim to be a grader hand as most of my work has been in snow removal
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 20 May 2015 at 5:29pm
bump
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Eric B
Date Posted: 20 May 2015 at 9:01pm
The running for 2 minutes stalling but restarting sounds a lot like restriction in the fuel supply...filters...debris in the bottom of the fuel tank or fuel lines...?
-------------
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!
|
Posted By: gemdozer
Date Posted: 21 May 2015 at 5:41am
|
The M-100B use a motor 10000
|
|