Farm Equipment - CA hand clutch parts?

Print Page | Close Window

CA hand clutch parts?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10188
Printed Date: 29 May 2025 at 4:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA hand clutch parts?

Posted By: hyperz
Subject: CA hand clutch parts?
Date Posted: 28 Mar 2010 at 11:05am

New to this forum and have a simple question. Where can you find rebuild parts for a CA hand clutch? I have read a lot of forums about how to and some great pics but I have searched the internet and parts houses and can't seem to find anything. I leave in North Carolina and the tractor is my grandfathers (one day will be mine) and he wants to weld it together to eliminate it altogether but I want to fix the clutch right. If you have any information please respond. Thank you.

Replies:

Posted By: JimB IN
Date Posted: 28 Mar 2010 at 11:18am

Try Sandy Lake Implement, listed with the vendors on this site. I am sure they will have them. JB

Posted By: norm [ind]
Date Posted: 28 Mar 2010 at 11:26am

only some parts are available springs facing mostly

Posted By: norm [ind]
Date Posted: 28 Mar 2010 at 11:27am

we do various pieces available used 1-574-342-4545

Posted By: Leon B MO
Date Posted: 28 Mar 2010 at 1:59pm

Try an AGCO dealer, I have bought the clutch pads and rivets from there. I think they may also have the springs, seats and balls but if I remember right they were pricey. After you get it apart and find which parts you actually need you may find someone on this site that has a used clutch for parts also. Best of luck on the CA, they are great little tractors.

Leon B MO

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".

Posted By: TMiller/NC
Date Posted: 28 Mar 2010 at 2:11pm

hyperz, where are you located in North Carolina? Caldwell Co. here, Tim.

P.S. I have a 53 CA, that the hand clutch needs repairing when I get to it.

Posted By: Gary
Date Posted: 28 Mar 2010 at 3:13pm

I have heard that you can eliminate the hand clutch completely by removing it and the 2 shorter axles, and replace them with another longer L/H axle.

Then if you ever get the hand clutch assembly repaired, you can reinstal it.

Gary

Posted By: Chris/CT
Date Posted: 28 Mar 2010 at 3:18pm

I have used parts available, also have a clutch disc ready to go, or can sell better quality facing kit than Agco's.

Posted By: hyperz
Date Posted: 29 Mar 2010 at 8:17pm

Thank you all for your information. I am located in Stanly County North Carolina and Chris I sent you a PM. We will need to get into the clutch to see what all parts that we may need. I am sure I will be asking a lot of questions and I am really enjoying this forum full of good information. ONE question is are there any Service manuals that are better than another that will give good repair information, the only thing we have is the original owners manual?

Posted By: Bill Long
Date Posted: 29 Mar 2010 at 8:51pm

If you do get into your hand clutch there are three ears that hold it together. When we did our first one it slipped even after we installed all new parts. Therefore we ground 1/8" off of each ear. Fixed it and when we did any after that we always ground 1/8". Right or wrong it worked.

I would try Sandy Lake for parts. I hear they are really good for AC parts.

Good Luck!

Bill Long

Posted By: Ted in NE-OH
Date Posted: 30 Mar 2010 at 2:29pm

Sandy Lake has an 800 number 1-888-252-0656