Heisler two barrel carb and manifold info
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=101827
Printed Date: 09 Sep 2025 at 6:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Heisler two barrel carb and manifold info
Posted By: orangeone
Subject: Heisler two barrel carb and manifold info
Date Posted: 11 Feb 2015 at 7:38pm
I have a Heisler two barrel manifold for my AC and am in search of a carb for it any info will be a help thank you Andrew 
|
Replies:
Posted By: Steve in NJ
Date Posted: 12 Feb 2015 at 8:38am
|
That's interesting. Never heard of a Heisler manifold before. What AC engine does that fit? And, what brand carburetor goes on that? Just curious... ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: DrAllis
Date Posted: 12 Feb 2015 at 8:53am
| I have one that was designed for a WC or WD. I no longer have the carb, which was two-barrels/two throttle butterflies, so it makes the manifold kind of useless. It was not for a WD45, as the carb hose was the smaller diameter. I think their goal was the increase the HP of a WD to try and match the WD45 |
Posted By: HudCo
Date Posted: 12 Feb 2015 at 9:01am
| i never seen one like that mush be a proto or an r&d part ?? |
Posted By: DrAllis
Date Posted: 12 Feb 2015 at 11:32am
| No. It was a go-fast part just like M&W pistons/sleeves.......Sherman overdrives, etc, etc. I'd sell my manifold for $50 if someone wants it. |
Posted By: HudCo
Date Posted: 12 Feb 2015 at 12:38pm
| that sure has me interested |
Posted By: TexasAllis
Date Posted: 12 Feb 2015 at 2:49pm
|
Pictures?
------------- 1944 Allis C 1960 Allis D-17 LP |
Posted By: Steve Zidlicky
Date Posted: 12 Feb 2015 at 7:23pm
| Heisler made both manifolds and heads for 2 cylinder john deere's. they were for more power. the manifolds while still all one piece had the intake runners designed to run cooler thus more power from cooler fuel and the heads were "flat heads" for more compression. |
Posted By: orangeone
Date Posted: 13 Feb 2015 at 9:49pm
| I would be interested in your manifold where are you located? please text or call me at 641 -352-0327 my name is Andrew and I am in central iowa and my e-mail is allischalmers53wd@yahoo.com |
Posted By: norm[ind]
Date Posted: 14 Feb 2015 at 7:10pm
| heisler made lots of aftermarket parts-transmisson parts and kits-step up an down |